User manual PHILIPS 14TVCR240

[. . . ] Searching for tape position with the picture (picture search) . Searching for tape position without the picture (wind and rewind) . Automatic search for a tape position (index search) . Recording without automatic switch-off . [. . . ] D To call up the standard settings, switch the set off and on again. c Select the required line with the menu buttons BP r or AP q SqC and alter with the menu buttons . DSr or D To store this setting as a standard setting, select the line 'Store as pref. ' with the menu buttons BP r or AP q . Select 'YES' and confirm with the OK button. d To end, press MENU button. Automatic volume control (AVL) E Switch on 'Auto volume cont. ', to activate the automatic volume control. This will minimise sudden changes in TV volume, e. g. when commercial spots are being transmitted or when switching TV channels. 13 How to read TELETEXT E Press the TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXT of the TV channel currently selected. E To store the current page as preferred page, press the OK button. The next time you call up TELETEXT, you will automatically turn to this page. E If you want to select an other page, type in the number of the page with the digit buttons 0-9 . With the colour buttons on your remote control you can directly select the page numbers shown at the bottom of the TV screen. Extra TELETEXT functions To use the extra TELETEXT functions, press the when you are in TELETEXT. MENU button, E To enlarge the print, select the symbol 'g' and confirm with the OK button. E To switch off the TELETEXT decoder temporarily, select the symbol 'd' and confirm with the OK button. E To call up a TELETEXT sub-page: a Select the symbol '}' and confirm with the OK button. b Enter the page number of the sub-page with the 0-9 -buttons (e. g. : 0123). E To call up concealed information, select the symbol 'b' and confirm with the OK button. D To cancel this information, press the e Confirm with the OK button. f To end, press the MENU button. CLEAR button. Recording without automatic switch-off a Insert a cassette. b Use the P p button to select the programme number Protecting your recordings So that you don't accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right. you want to record, for example, 'P01'. D Programme number 'E1' is provided for recording from external sources (via the EXT. D Programme number 'AV' is provided for recording from external sources (via the Audio/Video socket AUDIO at the front of the TV-VIDEO Combi). c To start recording, press the RECORD/OTR n button on the Auto-assembling You can use the auto-assembling function to join individual recordings without any major picture disturbance between them. a While the cassette is playing, search for the correct remote control or 5 on the TV-VIDEO Combi. When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit. d Stop recording with the STOP h button. position on the tape. b Stop the cassette by pressing the STOP h button. D If you want to switch off the screen while recording, press the STANDBY m button once . D To switch the screen back on again, press the P p button. D During a recording you can watch other TV channels. 'Pause' will appear on the TV screen. c Now start recording as usual by pressing the RECORD/OTR n button on the remote control. Selecting the recording speed (SP or LP) Recording with automatic switch-off (OTR one-touch-recording) a Put a cassette in the machine. b Use the P p button to select the programme number You can reduce the recording speed by half. This makes it possible to record, for example, eight-hours instead of four-hours on an 'E240' (four-hour) cassette. a Press the MENU button. [. . . ] Poor TELETEXT reception: On 'P01' store a TV channel with good TELETEXT reception. You have not activated the Smart Clock function: Switch the function 'ON'. If, contrary to expectation, you have any problems using this TV-VIDEO Combi, it may be caused by one of the reasons mentioned below. You can also call the customer service centrein your country. You will find the phone number in the enclosed guarantee leaflet. [. . . ]