User manual PHILIPS 150P4CB

[. . . ] Philips 150P4CG/150P4CB/150P4CS Electronic User's Manual file:///D|/C/english/150p4cgbs/index. htm [3/17/2003 7:14:03 PM] Safety & Troubleshooting Safety and Troubleshooting Information Safety Precautions and Maintenance · Installation Locations · FAQs · Troubleshooting · Regulatory Information · Other Related Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: q Unplug the monitor if you are not going to use it for an extensive period of time. q Unplug the monitor if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids. q q q q q q q q q q q Consult a service technician if the monitor does not operate normally when you have followed the instructions in this manual. [. . . ] Since the reaction speed of liquid crystal in an LCD panel is much slower, this troublesome form of flickering is not present in an LCD display. Q: Why is an LCD monitor virtually free of Electro Magnetic Interference?A: Unlike a CRT, an LCD monitor does not have key parts that generate Electro Magnetic Interference, especially magnetic fields. Also, since an LCD display utilizes relatively low power, its power supply is extremely quiet. RETURN TO TOP OF THE PAGE Ergonomics, Ecology and Safety Standards Q: What is the CE mark?A: The CE (Conformité Européenne) mark is required to be displayed on all regulated products offered for sale on the European market. This 'CE' mark means that a product complies with the relevant European Directive. A European Directive is a European 'Law' that relates to health, safety, environment and consumer protection, much the same as the U. S. National Electrical Code and UL Standards. Q: Does the LCD monitor conform to general safety standards? file:///D|/C/english/150p4cgbs/safety/saf_faq. htm (7 of 8) [3/17/2003 7:14:34 PM] FAQs (Frequently Asked Questions) A: Yes. Philips LCD monitors conform to the guidelines of MPR-II and TCO 95/99/03 standards for the control of radiation, electromagnetic waves, energy reduction, electrical safety in the work environment and recyclability. The specification page provides detailed data on safety standards. More information is provided in the Regulatory Information section. RETURN TO TOP OF THE PAGE file:///D|/C/english/150p4cgbs/safety/saf_faq. htm (8 of 8) [3/17/2003 7:14:34 PM] Troubleshooting Troubleshooting Safety and Troubleshooting · FAQs · Common Problems · Imaging Problems · Regulatory Information · Other Related Information This page deals with problems that can be corrected by the user. If the problem still persists after you have tried these solutions, contact your nearest Philips dealer. Common Problems Having this problem?No Picture (Power LED not lit) Check these items q q Make sure the Power cable is plugged to the wall and the back of the monitor. Firstly, ensure that the power button in front of the monitor is in the OFF position, then press it to ON position again. Make sure the signal cable is properly connected to your computer. Check to see if the monitor cable has bent pins. The Energy Saving feature may be activated Make sure the monitor cable is properly connected to your computer. Check to see if the monitor cable has bent pins. Make sure the vertical sync of input signal is within the range of 56 ~ 75 Hz. Change the refresh rate to 56~75Hz within 10 minutes. Re-power on monitor to start over again if you failed to change the refresh rate within 10 minutes. The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. It may not work properly if you are using non-standard PC or video card. q No Picture (Power LED is amber or yellow) q q q Screen says q q q Screen says q q q q AUTO button not working properly q Imaging Problems file:///D|/C/english/150p4cgbs/safety/saf_troub. htm (1 of 3) [3/17/2003 7:14:34 PM] Troubleshooting q Display position is incorrect q Press the Auto button. [. . . ] Phone: (05)-3687788 / 9180050462 Fax : (05)-7284272 file:///D|/C/english/warranty/warcic. htm (2 of 8) [3/17/2003 7:15:18 PM] Consumer Information Centers PARAGUAY Philips del Paraguay S. A. Avenida Artigas 1513 Casilla de Correos 605 Asuncion Phone: (021)-211666 Fax : (021)-213007 PERU Philips Peruana S. A. Customer Desk Comandante Espinar 719 Casilla 1841 Limab18 Phone: (01)-2136200 Fax : (01)-2136276 URUGUAY Ind. Philips del Uruguay S. A. Luis Alberto de Herrera 1248 Customer Help Desk 11300 Montevideo Phone: (02)-6281111 Fax : (02)-6287777 VENEZUELA Industrias Venezolanas Philips S. A. [. . . ]