User manual PHILIPS 16807-31-16

[. . . ] From the pop-up window, select Install Philips device Manager. Follow the on-screen instructions to complete the installation of Philips device Manager. If the pop-up window is not displayed automatically: 1 Select My computer (Windows XP / Windows 2000) / computer (Windows Vista). 3 Select Install Philips device Manager. 5 EN 2 Connect and charge When you connect the player to the PC, it automatically charges. A connect to Pc 1 Before you use the player for the first time, charge it for at least 5 hours. > The battery has a 100% charge after 4 hours and an 80% charge after 2 hours. [. . . ] 2 Connect the supplied USB cable to the mini USB port at the bottom of the player, the other end to your PC. > The player will start to charge as soon as it is connected to your PC. B Read the battery level indication of your player Full Two-thirds full Half full Low The approximate power levels of your battery are indicated as follows: Empty Note When the batteries are almost empty, the low battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds. 6 3 Transfer 1 Click and highlight one or more songs to transfer between your player and your computer. 2 Use drag and drop actions to complete your transfer. Tip To transfer music CDs to the player use software such as Windows Media Player, rip (convert) the songs on your music CD into MP3/WMA files. Copy the files into the digital audio player via Windows Explorer. Free versions of these programs can be downloaded from the internet. The player appears as a USB mass storage device in Windows Explorer. You can organize files, and transfer music to your player during USB connection. A Transfer music 4 Enjoy To turn on, press z/2; until the display shows the Philips logo. To turn off, press and hold z/2; until the display shows `bye'. 2 Press 2; to confirm. 10 Troubleshooting how do I reset my player? Insert a small pin or other sharp object into the reset hole located at the bottom of the player. Hold until the player shuts down. If none of the above works, then you may have to use the device Manager to recover your player: 1 Launch the Philips device Manager at Start > Programs > Philips digital audio Player > Sa19XX > Philips Sa19XX device Manager on your PC. 2 Press and hold the button while your player is connecting to the PC. 3 Keep holding the key until the Philips device Manager acknowledges your player and goes into recovery mode. 4 Click the Repair button and follow the instructions given by the device Manager. 5 After the player has been repaired, disconnect it from your PC and re-start. 11 EN Need help? User Manual Online See the user manual that came with your player. Go to www. philips. com/welcome Disposal of your old product and the integrated battery All our products are designed and manufactured with high quality materials and components, which can be recycled and reused. The crossed-out wheel bin symbol on a product means that the product is subject to the European Directive 2002/96/EC. This symbol can also be used in combination with a chemical symbol, which means that the product complies with the environmental directive for that chemical. [. . . ] This symbol can also be used in combination with a chemical symbol, which means that the product complies with the environmental directive for that chemical. Never dispose of your product with other household waste. Inform yourself or ask your dealer about local environmentally safe recycling regulations. The correct disposal of your old product helps prevent potentially negative consequences for the environment and human health. [. . . ]