User manual PHILIPS 16811-31-16

[. . . ] Place Handset on Base unit is displayed on the handset screen. The PIN is required before you can register or unregister handsets. Easy registration This type of registration is available when you wish to register your SE6580 on a SE650, SE655 or SE658 base station. [. . . ] Moreover, the PIN code of the base station has to be the default one, that is 0000. If you have already changed it, please refer to base station user guide to reset it to default 0000 or refer to Manual Registration below. Insert the unregistered handset into the base station to automatically begin registration. · Upon successful registration, a validation tone is emitted on the base (except for SE650) then on the handset, and the handset number (1 to 8) will be assigned by the base automatically. · If the easy registration fails, please refer to "Manual Registration" below. On the base station, press and hold handset locator a for 3 seconds. A beep sounds to indicate that the base station is ready to accept registration. (No beep sounds on the SE650. ) Note If no action is taken on the handset within 90 seconds, the registration procedure will be aborted. A validation tone is emitted and the screen returns to the previous menu. Troubleshooting For more information, please refer to the User Manual that came with your phone. Problem · There's no dialling tone!Solution · No power: Check the connections. · Batteries are empty: Charge the batteries. · Move closer to the base station. · Wrong line cord used: Use the line cord provided. · Move closer to the base station. · Move the base station at least one metre (yard) away from any electronic appliances. [. . . ] · Move the base station at least one metre (yard) away from any electronic appliances. · Move closer to the base station. · Make sure that your base station is on. [. . . ]