User manual PHILIPS 16811-87-16

[. . . ] Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products. The correct disposal of your old product helps prevent potentially negative consequences on the environment and human health. The packaging of this product is intended to be recycled. [. . . ] © 2010 Koninklijke Philips Electronics N. V. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N. V. or their respective owners. Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Overview a b 1 2 3 4 5 6 7 VHF antenna UHF antenna Power LED indicator Power and gain control switch Coaxial cable (for TV connection) 6V DC power connection 100V-240V AC/6V DC power adaptor (included) c d TO TV DC IN 6V e f EN 5 English 2 Your 16811-87-16 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. 2 Connect the DC plug to the antenna and the power supply to a 120V AC outlet. TO TV DC IN 6V Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note · Choose a location near a window which gives the antenna a clear view of the transmitter. 4 Set up 16811-87-16 For VHF/FM reception 1 Extend the telescopic dipoles to the longest possible length. Note · Place the antenna away from the metal surface to avoid interference. 2 Connect to the TV To turn the amplifier up, move the gain control switch towards the max position. 1 Connect the signal output on the antenna to the TV. TO TV DC IN 6V 6 EN 3 Turn the TV or FM radio to the desired channel/station. Move the dipoles in different directions up and down until the reception is achieved. You can install available channels with the digital TV tuner. To exercise your rights under this warranty, you must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. For customer support or to obtain warranty service, please call 919-573-7854. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Philips' liability is limited to repair or, at its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted by law. This warranty gives you specific legal rights. You may also have other rights that vary from state to state. Warranty information can also be found at: www. philips. com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to: accessorysupport@philips. com How do I know how much gain (amplification) is required to receive a clear picture?Once you have the VHF dipoles extended to the longest length, turn on the amplifier. Turn the amplifier up to the max position and then reduce as needed. [. . . ] Turn the amplifier up to the max position and then reduce as needed. In some case, you need to turn the amplifier down to receive a clearer picture. Can I set up this antenna with a digital tuner?Yes, this antenna can be set up with a digital tuner. [. . . ]