User manual PHILIPS 16928-47-16

[. . . ] The material in this manual is believed adequate for the intended use of the system. If the product, or its individual modules or procedures, are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Philips warrants that the material itself does not infringe any United States patents. This is a structural property of the display (within common industry standards) and is not a malfunction. [. . . ] View a list of digital programmes being broadcast · The clock displays the current time using time data received from your TV service operator. Sleep timer Sleeptimer switches the TV to standby after a pre-defined period of time. You can always switch off your TV earlier or reset the sleeptimer during the countdown. The TV switches to standby after the pre-defined period of time. To disable the clock, repeat the above procedure. Enter the three number page number of the subtitles page (usually `888'). Subtitle language This feature is only supported on selected digital channels. Select a subtitle language from the list, then press OK. Listen to music Press the Navigation buttons to select a music track, then press OK. Browse USB You can view photos or play music and videos on TV from a USB storage device. Philips is not responsible if the USB storage device is not supported nor is it responsible for damage or loss of data from the device. [On]: Pass through of TV input signal via the CI-Slot Card is possible; use of CI-Crad slot is possible. Check with your local operator if CI-Card is compatible with this TV. [Auto USB] Enables or disables USB break-in feature in Professional mode: [Off]: When USB device is plugged in, the [Multimedia] menu will not appear automatically, but users can access [Multimedia] menu from the Guest menu. [Subtitles at Startup] Enables or disables the use of subtitles at startup: [Off]: No subtitles services available (Prison Mode) [On]: Subtitles services available [On during mute]: Subtitles services when TV audio is muted [Enable Subtitles] Enables or disables the use of subtitles in a DVB broadcast channel: [Off]: No subtitles services available (Prison Mode) [On]: Subtitles services available (with this the power consumption mode is predictable). [Enable Channel Map] Select Channel Map to be viewed: [Native]: Show standard default channel map [BDS]: To be used only if a STB is connected [Auto switch off] Enables or disables the use of automatic switch off the TV if no RC action is noticed after 240 minutes: [Off]: TV will not switch off after 240 minutes [On]: TV will switch of after 240 minutes [Power on] The power on function allows the TV to enter a specific mode ([On], [Standby], or [Last status]) of operation when the mains power is activated (cold start): [On]: The TV will always turn on (show startup channel) after the mains power is activated. [Standby]: When set, the TV will always turn to standby (status as defined in Low power standby option) after the mains power is activated. [Delayed reboot] Enables or disables the use of delayed standby: [Off]: No delay added when guest presses `Off' button. [On]: Delay added when guest presses `Off' button before going into standby; in case of a wrong guest interaction, activating the TV after this will be done directly without any startup delay. [Low power standby] The Low power standby option defines the TV to enter a specific standby mode after pressing the On/Off button on the remote control. To wake-up the TV both On/Off button on the RC or TV can be pressed: [Fast]: The TV will quickly turn on (show startup channel. (This mode is having more power consumption then the Green mode). [. . . ] To prevent damage to cables and connectors, be sure to leave a clearance of at least 2. Follow all instructions provided with the TV mount. Multimedia file names must not exceed 128 characters. No digital channels were found during the installation: · Disconnect the power cable from the power outlet. [. . . ]