User manual PHILIPS 16929-87-16

[. . . ] Should it become necessary to replace the mains fuse, this must be replaced with a fuse of the same value as indicated on the plug (example 10A). The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable. [. . . ] Never place liquid containers, such as vases, near the TV. If liquids are spilt on or into the TV, disconnect the TV from the power outlet immediately. Never place the TV, remote control or batteries near naked flames or other heat sources, including direct sunlight. To prevent the spread of fire, keep candles or other flames away from the TV, remote control and batteries at all times. â· Never insert objects into the ventilation slots or other openings on the TV. â· When the TV is swivelled ensure that no strain is exerted on the power cord. Strain on the power cord can loosen connections and cause arcing. â· Risk of short circuit or fire! â· Never expose the remote control or batteries to rain, water or excessive heat. â· Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Included in this TV is a special functional mode that allows the TV to be configured for commercial application. This feature is called Professional mode. This section has been designed to help install and operate this TV in Professional mode. Before reading this section, please also read section 3 to set the basic functionality of this TV. If the TV is not switched on, use the mains switch to switch the TV on. Professional Mode offers the following benefits: Access to the [TV Setup Menu] can be blocked. Guests) from deleting or changing channel settings and / or modifying picture and sound settings. This ensures that TVs are always set up correctly. After switching on, the TV will always start on the specified volume level and channel. â· The maximum volume level of the TV can be limited in order to prevent disturbance to other guest. This paragraph describes the functionality of each item in the Professional mode setup menu. [. . . ] Channels marked with [X] will not display video on the TV. Navigate with [^] and [v] Exit with [<]. After making the proper settings, activate the Professional Setup Remote Control mode (press the RC5 Setup button) and pressing Home/Menu to active the BDS Setup Menu. TV will read and store Cloning data from USB stick Etc) this can be done in TV Setup Mode only. [. . . ]