User manual PHILIPS 17229-87-16

[. . . ] If this equipment does not cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measure. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Correct the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] Check the ''FINE TUNE ''is set up correctly and if not, adjust the fine tuning properly. Check the antenna or its connection is correct and if not, correct the antenna fault or connection cable fault. Check if car traffic or neon sign disturbs the sound effect. Check the susceptible interference by other electronic devices such as radio and television and keep magnetic or electronic devices away from the TV. Long distance from the station or other radio waves can generate bad sound. Check if the batteries in the Remote control die. Check if any object between IR sensor of the TV and the Remote control does not obstruct. Picture has ''snow noise ''. Stripes on picture. Bad stereo or SAP sound. Remote control does not work. ''Out Of Range'' appears on the screen. Check the resolution and frequency of your PC. Then, adjust them to optimum condition for LCD TV: 1024X768 and 60Hz. Refer to the table of PC mode input format indicated on page 22. (Not being registered resolution and frequency on the table won't be displayed. ) ''No Signal'' appears on the screen. To make the Display disappear, press the OSD button on the remote. Note: The language feature only works if the disc was created with multiple audio tracks. When you choose an audio language from the Display, you only override the audio language setting in the DVD player's main menu temporarily. The audio language can also the changed through the DVD player menu. Selecting the Subtitle Language If the disc was created with subtitles, you can use the Display to change the Subtitle language. or or buttons to highlight the Chapter icon. buttons to go to the previous or next press a button that doesn't have any function. If one of the icons is "grayed out ", that Display feature isn't available for the disc you're playing. To make the Display disappear from the screen, press OSD on the remote. DVD DVD discs have the following playback features:Title, Chapter, Audio, Subtitle, Angle and Repeat. Select a Title Some discs contain more than one title. For example, there might be four movies on one disc (each movie might be considered a title). [. . . ] Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. page44 Technical Specifications Laser Video system Frequency response Signal/noise ratio Audio distortion + noise Channel separation Dynamic range Audio out (analog audio) Output output level: Video out Load impedance: 75 , imbalance, negative polarity Power supply Power Consumption DC12V, 5A 20W 1Vp-p±20% Wavelength 650nm NTSC 20Hz ~ 20KHz±2. 5dB 85dB - 80dB (1KHz) 85dB ( 1KHz) 85dB ( 1KHz) output level: 2V±10% Load impedance: 10K This manual is only for your reference, any change to the design and specifications will not be advised. page45 Warranty Page Ninety (90) Days Free Product Exchange MAGNAVOX warrants this product against defect in material or workmanship, subject to any conditions set forth as follows: PROOF OF PURCHASE: You must have proof of the date of purchase to exchange the product. A sales receipt or other document showing the product and the date that you purchased the product as well as the authorized retailer included, is considered such proof. WHERE WARRANTY EXCHANGE IS AVAILABLE: Exchange is available in all countries where Magnavox officially distributes the product. In countries where Magnavox does not distribute the product, the local Magnavox organization will attempt to exchange the product, although there may be a delay if the appropriate product is not readily available or special customs processes are implied. COVERAGE: Warranty coverage begins the day you buy the product. [. . . ]