User manual PHILIPS 17CE1230

[. . . ] 5 MAIN MENU / ADVANCED CONTROLS WINDOW POWER SAVING . 8 MAIN MENU / COLOR TEMPERATURE WINDOW 9300° K . 10 ADDITIONAL INFORMATION AUDIO & USB SET UPS . 59 Other language versions FRENCH (FRANCAIS) . [. . . ] Note: a checkmark appears beside the current SYNC INPUT selected. Smart Help To make other changes in the ADVANCED CONTROLS window . after returning to ADVANCED CONTROLS window [but before pressing the ON SCREEN DISPLAY (OSD) button a third time in STEP 6], turn the ROTARY knob until another feature ­ for example, SYNC INPUT SELECT ­ is highlighted. Next, follow steps 2 - 6 under SYNC INPUT SELECT. after you have exited completely, press the OSD button and follow the steps under that feature, for example, SYNC INPUT SELECT. Smart Help To make other changes in the Main Menu window . after returning to THE Main Menu [but before pressing the ON SCREEN DISPLAY (OSD) button in STEP 6], turn the ROTARY knob until another feature ­ for example, COLOR TEMPERATURE ­ is highlighted. Next, press the OSD button, turn to the next page and follow steps 2 - 7 under COLOR TEMPERATURE. after you have exited completely, press the OSD button and use the ROTARY knob to select that feature, for example, COLOR TEMPERATURE. 8 How to Use the On Screen Display (OSD) Color Temperature window 9300° K / 6500° K Your monitor has two preset options you select: 9300° K or 6500° K. Computer Aided Design (CAD) usually works best with the 9300° K setting. Desktop Publishing (DTP) usually works best with the 6500° K setting. The screen will change as you scroll between these two settings. Select the one that works best for you, or set up your own setting under USER 1 or USER 2 on the next page. 1 Press the ON SCREEN DISPLAY button. 2 Turn the ROTARY knob until the COLOR TEMPERATURE window is highlighted. . to exit the ON SCREEN DISPLAY completely, press the ON SCREEN DISPLAY button twice more after completing step 7 above. 10 How to Use the On Screen Display (OSD) Geometry window Rotation, Pincushion, Trapezoid, Balanced Pincushion, Parallelogram Follow the steps below to adjust any of the five preset options (ROTATION, PINCUSHION, TRAPEZOID, BALANCED PINCUSHION, or PARALLELOGRAM). You can make individual adjustments to each of the preset options. Note: use these features only when the picture is not square. 1 Press the ON SCREEN DISPLAY button. 2b 2a Turn the ROTARY knob until the GEOMETRY window is highlighted. Next, press the ON SCREEN DISPLAY button. Then, if necessary, turn the ROTARY knob until ROTATION icon is highlighted. Press the ON SCREEN DISPLAY button. Then, turn the ROTARY knob to adjust the rotation. 2c 5a 5b 5c To select BALANCED PINCUSHION or PARALLELOGRAM, turn the ROTARY knob until BALANCED PINCUSHION or PARALLELOGRAM icon is highlighted. Next, press the ON SCREEN DISPLAY button. Then follow steps 4b and 4c to make the appropriate changes. When done, press the ON SCREEN DISPLAY button to save the change and return to GEOMETRY window. 3a 4c When done, press the ON SCREEN DISPLAY button. This will save the change and return the screen to GEOMETRY window. To select PINCUSHION, turn the ROTARY knob until PINCUSHION is highlighted. Next, press the ON SCREEN DISPLAY button. 4b 4a Turn the ROTARY knob to adjust the trapezoid. To select TRAPEZOID, turn the ROTARY knob until TRAPEZOID Icon is highlighted. Next, press the ON SCREEN DISPLAY button. 3c When done, press the ON SCREEN DISPLAY button. [. . . ] No Picture (Power LED not lit) CHECK THESE ITEMS Make sure the Power cable is plugged in the wall and back of the monitor. Power button on top of the monitor should be in the ON position. Disconnect the monitor from the power outlet for about one minute. Make sure the monitor cable is properly connected to your computer. [. . . ]