User manual PHILIPS 190BW9CB

[. . . ] e-Manual Philips LCD Monitor Electronic User's Manual file:///H|/OEM MODELS/Philips 2008/CD MANUAL/190BW9 EDFU/190BW9/lcd/manual/ENGLISH/190BW9/INDEX. HTM [2008/6/11 10:57:57] Safety Precautions and Maintenance FAQs Troubleshooting Regulatory Information Other Related Information Safety and Troubleshooting Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Operation: Keep the monitor out of direct sunlight and away from stoves or any other heat source. Remove any object that could fall into ventilation holes or prevent proper cooling of the monitors electronics. Do not block the ventilation holes on the cabinet. When positioning the monitor, make sure the power plug and outlet are easily accessible. [. . . ] First launch ­Wizard The first time after installation of SmartControl II, it will automatically go to Wizard for first time launch. The wizard will guide you through adjustment your monitor performance step by step. You can go to Plug-in menu to launch wizard later on as well. You can adjust more options without wizard by Standard pane. Wizard Analog Seguence Resolution Focus Brightness Contrast Position White Point (Color Temp) File Wizard Degital Seguence Resolution Contrast Brightness White Point (Color Temp) File - 2. Start with Standard pane: Adjust menu: Adjust Menu allow you to adjust Brightness, Contrast, Focus, Position and Resolution. You can follow the instruction and do the adjustment. Cancel prompts user if you want to cancel installation. Tab Heading Adjust Adjust Adjust Adjust Adjust Sub Menu Brightness Contrast Focus (Clock & Clock Phase) Position Resolution Display in Analog Yes Yes Yes Yes Yes Display in Digital Yes Yes No No Yes Color menu: Color Menu allow you to adjust RGB, Black Level, White Point, Color Calibration, and SmartImage (Please refer to SmartImage section). You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input. Tab Heading Color Color Color Color Color Sub Menu RGB Black Level White Point Color Calibration Viewing Mode Display in Analog Yes Yes Yes Yes Yes Display in Digital Yes Yes Yes Yes Yes Example for Color Calibration Optional Menu Option Menu let you to activate some features like AutoPivot, Preference, Input Selection and Audio Function. You can follow the instruction and do the adjustment. Refer to below table for sub-menu item base on your input. Tab Heading Options Options Options Options Sub Menu Auto Pivot Preferences Input Audio Display in Analog Yes Yes Yes Yes Display in Digital Yes Yes Yes Yes AutoPivot, Input and Audio function will only available and shown if the product supports those features. Help Menu Help Menu will give you some information of Manual, Update, ID, System ID and version. It will automatically generate a report for Philips supporting to understand your enviorment by click "Tech. Refer to below table for sub-menu item base on your input. Tab Heading Help Help Help Help Help Sub Menu User Manual Update Display ID System ID Version Display in Analog Yes Yes Yes Yes Yes Display in Digital Yes Yes Yes Yes Yes Example for support form after you click "Tech. Support" Plug Ins Menu Example for on line register theft Deterrence PIN Plug Ins Menu will allow you to have more add on features if applicable. PIP and Zoning functions will only support for the models with Video inputs. SmartManage Lite for Asset Management will only be supported if you activate it Example for Theft Deterrence when installation. Personal user usually will not need this function. [. . . ] The hub isolates low speed ports from full speed signaling. A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocolcontrolled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. [. . . ]