User manual PHILIPS 19LT010L

[. . . ] 3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL Institutional Television Television www. philipsitv. com www. philipsitv. com PL, TL, PC, TC, OCC, CH1, HC Directions For Use P 1 3135-125-21331 3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] When SAVED is selected, the channel will remain or be added to the TV's program memory. When DELETED is selected, the channel will be dropped from the TV's program memory and will not appear when the TV channels are scanned (using the Channel +, - buttons). INPUT - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons on the remote to select ANTENNA, FRONT, AUX, S-VIDEO, or CVI input signal options. The Input control directs the TV to select the specific indicated input whenever this channel is tuned. LABEL - When highlighted, press the Cursor Right (+>) button on the remote to select the first character space area. Then press the Cursor Up and Down buttons to scroll through the list of available letter characters, numbers, or symbols provided for your labeling use. Press the Cursor Right (+>) button to highlight the next character space and continue to repeat the process until the complete label or channel title has been entered. The Channel Label will appear in the corner of the TV screen beside the selected channel number. VIDEO BLANK - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to turn the VIDEO BLANK control ON (or OFF). When ON, no video will be shown when this specific channel is tuned. When OFF, normal viewing of video for this specific channel will take place. AUDIO BLANK - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to turn the AUDIO BLANK control ON (or OFF). When ON, no sound will be heard through the TV speakers when the channel is tuned. When OFF, normal sound playback will be heard for the selected channel. CHANNEL - When highlighted, use Channel Up/Down, or enter the desired channel number using the Number buttons you wish to edit. The following control items, contained within the Channel Installation menu, will effect the chosen channel. AUTO PROGRAM - When highlighted, press the Cursor Right (+>) or Left (<- ) buttons to begin an automatic channel search for all available received signal programs. Any channels found will be SAVED in the TV's program memory. * COMMERCIAL FEATURE 7 3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL HOW TO USE THE ON-SCREEN MENU (CONTINUED) CABLE TUNING (OFF / ON) SETUP x CONSUMER x FEATURES MENU_ Your Philips television can be configured to operate in either Cable TV or broadcast / off-air tuning modes. In other words, the TV must be configured depending upon whether a Cable TV signal or a normal antenna signal is applied to its 75-ohm ANT/CABLE plug. With the Menu onscreen, press the Menu button repeatedly, or use the Cursor Up and Down buttons, to select CABLE TUNING with the TV's highlight control bar. Press the Cursor Right or Left button on the remote to select ON if you DO have Cable TV connected to the TV, and Channels 1-125 may then be selected. Or, select OFF if you have an Antenna connected to the TV, and then only channels 2-69 may be selected. [. . . ] SAVE CC* (OFF / ON) SETUP x CONSUMER FEATURES MENU_ Applicable / available only to the Commercial Mode / setup menu. When SAVE CC is OFF, the television will always power-up with closed-captioning turned off. When SAVE CC is ON, the television "remembers" the most recentlyselected closed-captioning mode. In other words, the television will always power-up with closed-captioning set to the mode to which it was last set. [. . . ]