User manual PHILIPS 2 HD KID VIDEO VCR BLUE VRKD12BL99

[. . . ] Video Cassette Recorder VRKD11YL VRKD12BL Instruction Book Important!Return your Warranty Registration Card within 10 days. See why inside. Return your Warranty Registration card today to make sure you get all the available benefits. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] (Press the VCR/TV button so that the VCR/TV light appears. ) Then, press the PLAY button. · Other playback options and features are on pages 33-37. · If AUTO REPEAT is set to ON, playback will begin automatically, even when the record tab is intact. Details are on page 33. 24 Recording Read and follow the steps below to record a television program. 1 Turn on the TV; set it to channel 3 or 4, whichever channel the CH3/CH4 switch on the back of the VCR is set to. 1 2 7 Turn on the TV. Insert a tape. 2 3 4 5 6 7 8 POWER CHANNEL PAUSE Insert a tape with its record tab intact (see page five) in the VCR. The POWER, VCR/TV, and CST. IN lights will appear. PLAY 5 8 VCR/TV DISPLAY If the VCR/TV light does not appear, press the VCR/TV button so that the VCR/TV light appears. STOP F. FWD Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen. The tape speed will disappear after about five seconds. You can change the tape speed while the VCR is recording, but some distortion may appear on the tape. Details about tape speed are on page 42. REW RECORD 4 SPEED MENU 6 3 EXIT/ C. RESET COUNTER MEMORY Use the CHANNEL o/p button to select the channel to be recorded. Press the RECORD button once to start recording. If the tape is missing the record tab, the VCR will eject the tape. Helpful Hints · Other recording options are on pages 25-32. · The VCR will record in a preset volume. · Pause mode will automatically switch to Stop mode after five minutes to protect the VCR and the tape from damage. When a recording is paused, you may review the pause time remaining with the s marks on the screen. Each s mark equals one minute remaining. During the last minute of paused recording, the s mark will flash. · If a menu is on the TV screen, the RECORD button on the remote control will not work. Press the EXIT/C. RESET button to remove the menu. Then, press the RECORD button. To pause the recording (for example, during commercials), press the PAUSE button once. To resume recording, press the RECORD button or the PAUSE button again. The REC(ord) light will appear. Press the STOP button to stop recording. One-Touch Recording 25 One-Touch Recording (OTR) lets you record for 30 minutes to eight hours. [. . . ] Dubbing: copying a tape using a second VCR. HQ: high quality; a feature in the VCR that provides a better picture. Line Input: The channel to which you set your VCR during dubbing. The line input channel is always channel 00. [. . . ]