User manual PHILIPS 2 HD VCP AC-DC VPA115AT

[. . . ] Set the TV and the VCR to the Cable Box/DBS output channel (channel 03 or 04), and set your Cable Box/DBS to the channel you want to record. When you enter the channel you want to record in a timer recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 7 on page 28. ) Leave the Cable Box/DBS on for a timer recording. 1 IN Cable Box/DBS OUT 2 VCR 75 ANT CAB / LE ANT IN AUDIO Cable Signal RF coaxial cable OUT IN CH3 CH4 OUT VIDEO RF coaxial cable 3 TV's ANTENNA IN Jack Connections 1 2 3 Connect a Cable signal to the IN Jack on the Cable Box/DBS. Use an RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box/DBS to the ANT(enna) IN Jack on the VCR. Use a second RF coaxial cable to connect the OUT Jack on the VCR to the TV's ANTENNA IN Jack. Recording/Viewing Any Channel With the VCR on and in VCR position (the VCR/TV light will appear on the front of the VCR), use the CHANNEL o/p button to set the VCR to the Cable Box/DBS output channel (channel 03 or 04). 1 2 3 Set the TV to the same channel to which you set the VCR. Set the CH3/CH4 switch on the back of the VCR to the same channel. Select the channel you want to view/record at the Cable Box/DBS. Hookups With a Cable Box/Direct Broadcast System (cont'd) 9 With this connection: q You may watch one channel while recording another. [. . . ] (Make sure the TV is on the Cable Box/DBS output channel, 03 or 04. ) Then, with the VCR in VCR position (the VCR/TV light will appear on the front of the VCR), use the CHANNEL o/p button to select the channel you want to record at the VCR. Start the recording. Press the VCR/TV button once so that the VCR/TV light appears. Helpful Hint · When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04). Select the channel you want to watch at the Cable Box/DBS. 10 Hookups With a Stereo TV 1 ANT IN AUDIO OUT IN CH3 CH4 antenna or cable to ANT(enna) IN Jack Audio and Video IN Jacks on TV OUT VIDEO VIDEO (yellow) and AUDIO (white) OUT Jacks 2 3 Video Cable Audio Cable q Audio and Video cables are not supplied. 1 2 3 4 Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR. Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV. Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV. (If your TV has Right and Left AUDIO IN Jacks, you must use a "Y" splitter audio cable as illustrated to deliver audio to the TV's right and left channels. ) Turn on your TV, making sure it is in Line Input (or Auxiliary In or Video In) mode. Please refer to your TV instruction book for details. Helpful Hint · This hookup will not give you stereo sound. To get stereo sound, use the connections on page seven and select the channel to be viewed at the TV (with the VCR turned off). Front Panel 21 Remote Sensor Point the remote control here so you can operate your VCR from a distance. PAUSE Button While recording, press to temporarily stop the recording. Press a second time to resume normal recording. Press to select an item in the VCR menu or to change the setting of an item. 22 Back Panel ANT(enna) IN Jack Connect your antenna or cable here. AUDIO IN Jack Connect an audio cable coming from the audio out jack of a camcorder, another VCR, or an audio source here. AUDIO OUT Jack Connect an audio cable going to the audio in jack of a TV, camcorder, another VCR, or an audio system here. Details are on pages 10 and 32. ANT IN AUDIO OUT IN CH3 CH4 OUT VIDEO VIDEO OUT Jack Connect a video cable going to the video in jack of a TV, camcorder, another VCR, or an audio-visual system (laser disc player, video disc player, etc. ) here. AC Power Cord Connect to a standard AC outlet to supply power to the VCR. VIDEO IN Jack Connect a video cable coming from the video out jack of a camcorder, another VCR, or an audio-visual source (laser disc player, video disc player, etc. ) here. Details are on page 32. CH3/CH4 Switch Set to channel 3 or 4 to use your TV with your VCR. OUT Jack Use the supplied RF coaxial cable to connect this jack to the Antenna In Jack on your TV or Cable Box/DBS. Details are on pages seven-nine. 32 Rerecording (Copying Tapes) 1. Audio cable from AUDIO OUT Jack of VCR 1 to AUDIO IN Jack of VCR 2 VCR 1 Playing VCR VCR 2 - Recording VCR ANT IN AUDIO OUT IN CH3 CH4 ANT IN AUDIO OUT OUT IN CH3 CH4 OUT VIDEO VIDEO 1 2 3 4 5 6 7 2. [. . . ] Video cable from VIDEO OUT Jack of VCR 1 to VIDEO IN Jack of VCR 2 3. RF coaxial cable from the OUT jack of VCR2 to the TV's ANTENNA IN Jack VCR 1 will play your tape. If the tape does not have a record tab, playback begins. If this happens, press the STOP/EJECT button on VCR 1 once. VCR 2 will record your tape. [. . . ]