User manual PHILIPS 200P3G-00H

[. . . ] If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) Do not subject the LCD monitor to severe vibration or high impact conditions during operation. [. . . ] That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. There are the types of bright dot defects: file:///D|/My%20Documents/dfu/200P7/english/200p7/product/pixel. htm (1 of 3)2006-12-11 1:16:38 PM Philips Pixel Defect Policy One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple Three adjacent lit sub pixels - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) (one white pixel) A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. file:///D|/My%20Documents/dfu/200P7/english/200p7/product/pixel. htm (2 of 3)2006-12-11 1:16:38 PM Philips Pixel Defect Policy BRIGHT DOT DEFECTS MODEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* Total bright dot defects of all types ACCEPTABLE LEVEL 200P7 3 1 0 > 25 mm 3 BLACK DOT DEFECTS MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two black dot defects* Total black dot defects of all types ACCEPTABLE LEVEL 200P7 5 2 1 > 15 mm 5 TOTAL DOT DEFECTS MODEL Total bright or black dot defects of all types Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect Your Philips monitor is ISO13406-2 Compliant ACCEPTABLE LEVEL 200P7 5 RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/200P7/english/200p7/product/pixel. htm (3 of 3)2006-12-11 1:16:38 PM Rotating the Monitor · Rotating the Monitor · Rotating Your Computer's Operating System Rotating the Monitor Rotating the Monitor Before rotating the monitor, remove the pin on the back of the base and raise the monitor to a higher vertical height adjustment to avoid hitting the bottom edge of the monitor when rotating. file:///D|/My%20Documents/dfu/200P7/english/200p7/product/rotate. htm (1 of 4)2006-12-11 1:16:38 PM Rotating the Monitor file:///D|/My%20Documents/dfu/200P7/english/200p7/product/rotate. htm (2 of 4)2006-12-11 1:16:38 PM Rotating the Monitor Rotating Your Computer's Operating System After rotating, the procedures below help rotate the image from your operation system. 1. Right-click on the desktop then click on Properties. Select the Settings tab and click Advanced. For ATI graphics cards: Select the Rotation tab and set the preferred rotation. For nVidia graphics cards: Click the nVidia tab; in the lefthand column select NVRotate and then select the preferred rotation. For Intel graphics cards: Select the Intel graphics tab, click Graphic Properties; select the Rotation tab and then set the preferred rotation. If you do not find the rotation option or if you have problems when following the steps listed above, you need to go to your computer graphics card manufacturer's website or your computer manufacturer's website for information on rotating your operating system. file:///D|/My%20Documents/dfu/200P7/english/200p7/product/rotate. htm (3 of 4)2006-12-11 1:16:38 PM Rotating the Monitor RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/200P7/english/200p7/product/rotate. htm (4 of 4)2006-12-11 1:16:38 PM SmartManage · Product Information · Philips Pixel Defect Policy · SmartManage Introduction · SmartManage Features and Benefits · Philips SmartControl · Q&A SmartManage Introduction Philips SmartManage is an advanced solution for users, corporate/institution IT administrator in particular, to manage their Philips monitors as part of the asset management environment. The solution includes three essential components, Philips SmartManage Administrator, and Philips SmarControl and Agent. Philips SmartManage is a solution joint developed by Philips and Altiris Inc. SmartManage Features and Benefits The Philips SmartManage is a working console for IT management to gather monitors assets information, run asset report, control assets security, monitor assets security, and issue instant messages to monitor users. Otherwise, you will need to remove and reinstall SmartControl to ensure proper driver is installed. The SmartControl functions well at the beginning, but it is not workable, what can I do?If the following actions were executed, the monitor driver may need to be re-installed. q q q q q Change video graphic adapter to another one Update video driver Activities on OS, such as service pack or patch Run Windows Update and updated monitor and/or video driver Windows was booted with the monitor power off or disconnected. To find out, please right click My Computer and click on Properties->Hardware-> Device Manager. If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove SmartControl and re-install it. After installing SmartControl, when clicking on SmartControl tab, nothing shows up after a while or a failure message shows, what happened? file:///D|/My%20Documents/dfu/200P7/english/200p7/product/SMART. HTM (4 of 5)2006-12-11 1:16:39 PM SmartManage A. It might be your graphic adaptor is not compatible with the SmartControl. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies' web site. Remove SmartControl, and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please pay attention to Philips' web site for any updated SmartControl driver available. [. . . ] A hub consists of two portions: the Hub Controller and Hub Repeater. The repeater is a protocolcontrolled switch between the upstream port and downstream ports. It also has hardware support for reset and suspend/resume signaling. The controller provides the interface registers to allow communication to/from the host. [. . . ]