User manual PHILIPS 20FT3310

[. . . ] Care of the screen Do not touch the screen with anything hard as this may scratch, mar or damage the screen permanently. Do not rub with dust clothes with chemical treatment. Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen). Unplug the TV before cleaning the screen. [. . . ] · · · · · Switch On/OSD: In this sub-menu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected. Picture/Sound: In this sub-menu, the Picture and Sound settings of the TV can be selected. Security: In this sub-menu, the Security settings of the TV can be configured. Control: In this sub-menu, the Control settings of the TV can be configured. CC/V-Chip: In this sub-menu, the Close Caption and V-Chip settings of the TV can be configured. In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be selected. · Welcome Message: Press Cursor Left/Right to display the Welcome message entry menu: o Welcome Message o Line 1 o Line 2 o Clear With the Cursor Up/Down buttons you can set the message characters. Switch On Channel: This item sets the television's channel at switch on. Switch On Volume: This item sets the television's volume at switch on. Use the Right/Left Cursor buttons on the Remote Control to adjust. Switch On Pic Fmt: This item sets the television's Picture Format at switch on. Use the Right/Left Cursor buttons on the Remote Control to adjust. · · · · · · · · Power On: The Power On menu function defines the behavior of the television whenever AC Power is applied. The valid states are "FORCED ON", "LAST STATUS" and "STANDBY". o When "FORCED ON", the television can only be switched OFF by means of the main switch or a setup remote control or by ESP function (Energy Saving Programmability controls the maximum continuous viewing time allowed by the control system). o When "LAST STATUS", the television switches on the previous status, ON or Stand-by. o When "STANDBY", the television always switches on in Stand-by. Volume Indicator: To display volume indicator when adjusting volume, select "YES". Select "NO" to hide the volume indicator. Channel Display: Program Display values can be: Number, Label, All, None. Digit Timeout: This is the time-out to enter the second digit of channel number (example: for channel number 10 and above). 3 Digit Entry: To allow for 3-digit entry of channel numbers via the Remote Control, select "YES". Select "NO" to allow only 2-digit entry of channel numbers via Remote Control. -5- In this sub menu, the Picture and Sound settings of the TV can be configured. · · · · · · · · · Brightness: This changes picture brilliance. [. . . ] CC: This menu item allows selection of Close Caption channels, or to turn Close Caption "OFF". Saved V-Chip: This menu item sets the option of saving the V-Chip selection to "Yes" or "No". V-Chip Menu Item: This menu item sets the option of toggling the V-Chip Menu Item to "Yes" or "No". V-Chip Setup: This sub-menu allows the setting and disabling of Movie and TV ratings for the VChip. -7- The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). [. . . ]