User manual PHILIPS 20LL200

[. . . ] Should you wish to use the set in conjunction with other equipment, which connects to the aerial socket such as TV games, or a video camera it is recommended that these be connected via a combiner unit to avoid repeated connection and disconnection of the aerial plug. Fitting the stand (if provided) Use only the stand provided with the set, making sure that the fixings are properly tightened. A diagram showing how to assemble the stand is packed with the stand. Never use a make-shift stand, or legs fixed with woodscrews. Installing your television set æ Â ê ® Insert the aerial plug into the : socket at the rear of the set. Insert the mains plug into a wall socket (220-240 V / 50 Hz). Insert the two R6type batteries (supplied) making sure that they are the right way round. To switch on the set, press the on/off key. If the television remains in standby mode, press P # on the remote control. Quick installation The first time you switch on the television, a menu appears on the screen and the tuning starts automatically. [. . . ] The programmes found are arranged by number 99, 98, 97, . . . etc. You may now renumber these programmes as you wish. To exit or interrupt the search, press H. If no programme is found, see Tips chapter at the end of the instruction for use. Autostore ······················· 0 Æ If the menu is not displayed, press and hold down the "- and "+ keys on the TV set for 5 seconds to display the menu. Program sort & Press key H. The Main menu is displayed on the screen. " Use the 09 or @P# keys to select the program you wish to renumber. ` Then use the Ï key to select Program No and enter the new number with the Ȭ keys. ( With the Ï key, select Store and press ¬. § Repeat steps " to ( for each program you wish to renumber. è To quit the menus, press d. Manual Store Æ System Search Europe Æ 224 MHz é With the î key, select Manual Store and press ¬. 1 Remote control keys * Depending on the model, there are 2 different versions of the remote control.  key not used (teletext version *) or Á Previous programme To access the previously viewed programme. Pre-set sound (only available on certain versions) Used to access a series of stored settings: Voice, Music, Theatre. Cursor / Format 16:9 These 4 keys are used to navigate through the menus. The îÏ keys are used to enlarge or compress the picture vertically. Volume To adjust the sound level Mute To mute or restore the sound. If no programme is found, see Tips chapter at the end of the instruction for use. Program No. : enter the required number with the Ȭ or 0 to 9 keys. Store: press ¬. The program is stored. Repeat steps ` to § for each programme to store. To quit the menus, press d. ` Manual Store Æ System Search Europe Æ 224 MHz ( § è " System: select Europe (automatic detection*) or West Europe (BG standard), East Europe (DK standard), UK (I standard) or France (LL' ! Other settings in the menu & Press the H key. é Use the îÏ keys to select a setting and the Ȭ keys to adjust. : Brightness Colour Contrast Sharpness Auto Store Manual Store Brightness - ! + · Brightness: this changes picture brilliance. · Colour: this changes the intensity of the colour. · Contrast: this changes the difference between the light and dark tones. · Sharpness: this changes the picture definition. · Auto Store: to start automatic search for all programmes available in your region. Then, you need to use the Manual Store menu to renumber the programmes (see p. [. . . ] To select connected equipment, press several times the n key. Most equipment (decoder, VCR) carries out the switching itself. Headphones socket (only available on certain versions) When headphones are connected, the sound on the TV set will be cut. The @"# keys are used to adjust the volume level. [. . . ]