User manual PHILIPS 20PF9925/12S

[. . . ] Contents Installation Your remote control 2 Preparation 3 To use the menus 4 Store TV channels 4 Select the menu language 4 Automatic installation 5 Manual installation 6 Reshuffle the programme list 7 Displaying the programme list 7 Operation Use of the remote control 8-9 Keys in front of the TV 10 Picture menu 11 Sound menu 11 Special menu 12 Teletext 13-14 Help?If this instruction manual does not give an answer or if `Tips' do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. [. . . ] Press the cursor up/down to adjust the appropriate sound level. Press the OK key to store the Personal adjustments. Press the MENU key repeatedly to exit the menu. ooe OK MENU Flat Natural Music Movie Speech Personal ooe p & é 0. 1 0. 5 1. 5 5. 0 10 kHz " ` MENU You can select your preferred sound setting or you can also adjust the sound frequency of equalizer and the balance of the right and left speaker's sound output. Switch AVL On to maintain constant volume levels when switching TV channels. Use of the menus 11 Special menu Input Source Child lock Auto off TV Off Off ooe p MENU Auto AV switching If your VCR is connected to the euroconnector and the VCR is switched to playback, the TV is automatically switched to AV1 mode. If you want to keep on watching in TV mode, press the cursor up/down, + P - or press the digit keys. Child lock If the child lock is on, the TV can only be switched on and operated with the remote control. The keys in front of the TV cannot be used. In this way you can prevent unauthorised use of your TV. If the message Child lock On appears, the child lock must be switched off before you can use the front panel keys to select a TV channel. Press the cursor left/right to select Child lock On. & é Select TV or AV mode Select Source in the Special menu. Press the cursor left/right to select TV, AV1, AV2 or S-VIDEO. · AV1 for a VCR connected to the w 1 euroconnector. 15) · AV2 for a VCR connected to the AV2 connector of the TV. · S-VIDEO for a S-Video VCR connected to the S-Video connector of the TV. Note: When a VCR is connected via the aerial socket, the TV is used in TV mode. Alternatively you can select the TV or AV mode with the source key on the remote control. To return to TV mode, press the cursor up/down or the digit keys. & é " Press the MENU key repeatedly to exit the menu. Auto off If Auto off is switched On, the TV automatically switches to standby if for a period of about 12 minutes no aerial signal is received. & é " Select Auto off in the Special menu. Press the cursor left/right to select Auto off On. Press the MENU key repeatedly to exit the menu. 12 Use of the menus Teletext 7 0 8 0 9 LIST Switch Teletext on and off OK key to activate cursor to select pages Press b to switch the teletext on or off. The main index page or the last selected page appears on the screen together with an information headline and an option line at the bottom of the screen. MENU OK V ¬ P colour keys to select Select a Teletext page With the digit keys Enter the desired page number with the digit keys. A message appears when you have entered a non existent or incorrect page number. Complete the 3- digit number and then re-enter the correct page number. [. . . ] · Are the cables connected properly?(The aerial cable to the TV or VCR, the VGA cables to the TV, the power cable. ) · Is your TV or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc. ?· Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. [. . . ]