User manual PHILIPS 20PT2005

[. . . ] . 3 Remote Control Button Descriptions 9-10 Sleeptimer . . 16 Return your Warranty Registration Card today to ensure you receive all the benefits you're entitled to. IS T RA TION N EE DED W y!urr H T Congratulations on your purchase, and welcome to the "family!" To get the most from your PHILIPS product, you must return your Warranty Registration Card within 10 days. So please mail it to us right now! A YS REG I Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. [. . . ] When ANTENNA is selected, channels 2-69 are available. When AUTO is selected, the TV will automatically set itself to the correct mode based on the type of signal it detects when the AUTO PROGRAM eature is activated. 13 Y AUTOMATICALLY PROGRAM our TV can automatically set itself for local area (or Cable TV) channels. This makes it easy for you to select only the TV tations in your area when the CHANNEL +), (­) buttons are pressed. Note: Make sure the antenna or cable sigal connection has been completed before UTO PROGRAM is activated. Main Picture Sound Features Install Brightness Color Picture Sharpness Tint More. . . Main Picture Sound Features Install Language Tuner Mode Auto Program Channel Edit 1 2 3 4 5 6 Press the MENU button on the remote to show the on-screen menu. Press the CURSOR UP 3 or DOWN 4 buttons to scroll through the on-screen menu until the word INSTALL is highlighted. Press the CURSOR RIGHT 2 button to display the INSTALL menu features. Press CURSOR UP 3 or DOWN 4 buttons to scroll the Install features until the words AUTO PROGRAM are highlighted. Press the CURSOR RIGHT 2 button to start the Auto Program scanning of channels. Auto Programming will store all available channels in the TV's memory then tune to the lowest available channel when done. When finished, press the STATUS /EXIT button to remove the menu from the TV's screen. 2 4 1 2 4 VOL Install Language Tuner Mode Auto Program Channel Edit 6 3 Auto Program Channel 12 Auto Program Channel 13 Auto Program Channel 14 Helpful Hints When CABLE is selected, channels 1125 are available. When ANTENNA is selected, channels 2-69 are available. The Contrast + control helps to "sharpen" the picture quality. The black portions of the picture become richer in darkness and the whites become brighter. Picture Brightness Color Picture Sharpness Tint Color Temp. 50 1 2 3 4 5 6 7 Brightness Color Picture Sharpness Tint Color Temp. 65 50 50 50 0 Normal Warm or Cool On Off Contrast + 16 SOUND MENU CONTROLS o sound, Sound Menu listed below: Ttheadjust your TV Controlsselect and use 1 2 3 4 5 6 7 TREBLE: Press the CURSOR RIGHT 2 or LEFT 1 buttons to adjust the control. The control will enhance the high frequency sounds. BASS: Press the CURSOR RIGHT 2 or LEFT 1 buttons to adjust the control. The control will enhance the low frequency sounds. Main Picture Sound Features Install BALANCE: Press the CURSOR RIGHT 2 or LEFT 1 buttons to adjust the level of sound coming from the left and right speakers. AVL: (Auto Volume Leveler) Press the CURSOR RIGHT 2 or LEFT 1 buttons to turn the control On or Off. When On, AVL will level out the sound being heard when sudden changes in volume occur during commercial breaks or channel changes. Treble Bass Balance AVL Incr. Surround More. . . Treble Bass Balance AVL 50 50 L R On or Off INCR. SURROUND: Press the CURSOR RIGHT 2 or LEFT 1 buttons to select between Incr. Surround or Stereo settings (If Stereo), or select Spatial or Mono (If Mono). [. . . ] If necessary, replace them with AA Heavy Duty (Zinc Chloride) or Alkaline batteries. Clean the remote control and the remote control sensor window on the TV. Unplug the TV, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. Be sure the fuse is not blown on the AC power strip, if one is being used. [. . . ]