User manual PHILIPS 21GR1251

[. . . ] The TV-Video Combi should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. The TV-Video Combi needs this time in order to become acclimatised to its new environment (temperature, air humidity, etc. ). This TV-Video Combi is used for the recording and playback of A videocassettes. [. . . ] TV channel that you want to change. STOP C-L TIME --:-DATE --/--/-SMART CLOCK [ON] END=EXIT MOVE P01: P02: P03: P04: P05: 02 03 05 10 74 P06: 90 P07: 99 P08: 121 P09: 124 P10: 130 [14PV235 / 21GR1251] 4. Check the time in 'TIME'. If required, please 4. change the time with same way. 0. . 9 . 5. Check 'DAY', 'MONTH' and 'YEAR' in the 5. 6. Choose 'SMART CLOCK' ON or OFF with 6. FWD 1- B PLAY B-K SELECT K L CHOOSE B END=EXIT 5. Confirm with FWD 1- B . 6. Move the selected channel with 6. STOP C-L . [14PV235 / 21GR1251] or to the programme number you want to assign. 8. To assign other TV channels to a programme 8. 9. [14PV235 / 21GR1251] Time/date is displayed incorrectly despite manual setting With Smart Clock, time/date is taken from the TV channel saved on 'P01'. If you wish to switch this automatic time correction off, select 'OFF' for Smart Clock. You can reactivate this function at anytime by selecting 'ON' for Smart Clock. 7. To end, press 7. STATUS/EXIT . 8 EN T6460EZ(EN)_UK. qx3 04. 1. 28 1:19 PM Page 9 4. TV set functions Selecting a TV channel Select the desired TV channel (= the programme number) with PROG P+ PROG P­ or with 0. . 9 on the remote control. 3. Select an item using 3. and then modify with FWD 1- B . PLAY B-K REW0- s or STOP C-L , or SELECT K L ADJUST s/ B BRIGHTNESS CONTRAST COLOUR SHARPNESS TINT END=EXIT < < < < < > > > > > Selection of the scart socket To select the Scart socket, please enter 0, 0, 1, with the keys 0. . 9 on the remote control. AV1 appears on the screen. 4. To end, press 4. STATUS/EXIT . Selection of the front A/V sockets To select the front A/V sockets, please enter 0, 0, 2, with the keys 0. . 9 on the remote control. Playback Playing back cassettes You can use this TV-Video Combi to playback recorded VHS video cassettes. You can operate the TV-Video Combi using the remote control or the buttons on the set. Your TV-Video Combi can only record and play standard VHS cassettes. 1. Put a cassette into the cassette slot. DIGITAL STUDIO PICTURE CONTROL Philips has developed a system which produces the best possible playback quality. For old and often-used video cassettes, this system reduces interference. For new or high quality cassettes, it emphasises the details. Picture/ sound quality is poor When playing back rental videos or older, poorer quality cassettes, it may not be possible to completely filter out picture and sound interference. Read the section 'Manual tracking'. Playing back NTSC cassettes This TV-Video Combi can also play back cassettes that have been recorded in SP [Standard Play] or SLP [Super Long Play] mode in the NTSC standard (for example, American cassettes). Searching for a tape position with picture (scanning) 1. During playback, press 1. REW0- s (reverse) or FWD 1- B (forward). 2. If you want to search in super high speed, 2. (This function will not operate for a cassette recorded in SP mode in the NTSC standard. ) 3. Press PLAY B-K to resume playback. [. . . ] No picture when you play back a cassette: · There is no recording on the cassette: Change the cassette. Poor picture quality when you play back a cassette: · Your TV is not properly adjusted. · The cassette is badly worn or of poor quality: Use new cassette. · Tracking is not properly adjusted: Turn to section 'Manual tracking'. [. . . ]