User manual PHILIPS 21GR2751

[. . . ] Note Clock and wake-up alarm are not available on ProPlus sets when television is switched off by mains switch. When the set is in the High Security Mode, the Setup menu can be accessed only by a T374AH Institutional Set-up Remote Control (RG4172BK). When the set is in the Standard Security Mode the Set-up Menu may be accessed with a guest remote control (like the RC2882) by a sequence of commands. Your television contains material that can be recycled and reused by specialised companies. [. . . ] When this menu is open, all the protections are inactive. Right cursor starts an auto search; during frequency entry the digits not yet entered are displayed as dashes "-". Enter "0" for frequencies below 100 MHz. The programme type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO". If the program number of a certain type is 0, the corresponding type is not displayed. In order to display a program number of the above-mentioned types, always enter two numbers, for example: "01" for TV1 or digit "1" and up/down cursor. Store The present program information is stored after pressing the cursor left/right button. With the cursor left/right keys the protection can toggle between "YES" and "NO". Label This menu item will be used to add a label/name for each program. Pressing the left/right buttons you may enter or exit the label field; pressing the up/down cursor you may insert alphanumeric characters. The Automatic Volume Leveller feature is shown as "AVL" in the menu and its valid states are "YES"; "NO". The valid toggle states are "YES" and "NO": if YES, the volume is fixed at a certain volume, if NO, the volume contains 63 discrete values. This is the time-out to enter the second digit for TV program 10 onwards. With the cursor up/down you can set the message characters. With this item all protected programs can be freed. If "free protected programs" is set to "YES", all programs are accessible for the user, if the item is "NO" protected programs are skipped. A TV program can be selected by relevant digit but with picture blanked and sound muted. This feature will enable/disable in a "list" or "page", the program numbers with the associated labels. Energy Saving Programmability Mode (ESP) controls the maximum continuous viewing time allowed by the control system. it allows the establishment to limit the time the Television remains activated once a Guest has checked-out. The ESP Menu function is shown as "ESP", and its valid values are 00 - 99 (in hours). [. . . ] If your dealer cannot help, ask at a main Post Office for the booklet "How to Improve Television and Radio Reception". mains connection Before connecting the TV to the mains , check that the mains supply voltage corresponds to the voltage printed on the type plate on the rear panel of the TV. If the mains voltage is different, consult your dealer. Fit new fuse which should be a BS1362 5A, A. [. . . ]