User manual PHILIPS 21HT3312-79R

[. . . ] 21HT 25HT 29HT Instruction for Use p1-7 1 2/4/05, 1:40 PM TABLE OF CONTENTS Introduction Safety Information/Useful Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before Calling Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic Installation/Functions Hooking Up Your TV (Basic Connection). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Use/Care of Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] OF CHANNELS Highlight the item you wish to change. To store changes in the memory, ( ) key. The total number of channels cannot highlight STORE and confirm with the exceed 125. After storing is completed, TV will go into standby mode. TV INSTALLATION (for countries other than Philippines) Highlight INSTALLATION in the TV SETUP menu and enter its sub menu with the ( ) or ( ) key. Installation menu via local control is not available in Consumer/ Commercial modes. + INSTALLATION INPUT FRONT END COLOUR STANDARD AUTO* SOUND STANDARD AUTO* AUTO STORE É MANUAL SEARCH 175 MHZÉ CHANNEL TV 1 STORE É ||||||||||||||| FINE TUNE PROTECTION NO LABEL É TELETEXT LANGUAGE W VIDEO BLANK NO AUDIO MUTE NO Note: + only for commercial mode. * TV system dependant 10 p8-12 10 2/4/05, 12:18 PM TV INSTALLATION MENU INPUT This menu item selects the input source to be assigned per channel. The selectable sources are FRONT END, AV1, AV2, AV3, CVI, AV2YC or AV3YC (dependent on model). For models without Teletext feature, selection of W or A has no effect. VIDEO BLANK To blank out picture of the channel, select YES. AUDIO MUTE To switch off the sound of the channel, select YES. TV SETUP SUB-MENUS (CON'TD) CLOCK SETUP To set time for display on the top right hand corner. Highlight CLOCK SETUP. TV SETUP LANGUAGE NO. OF CHANNELS INSTALLATION CLOCK SETUP BRIGHTNESS COLOUR CONTRAST SHARPNESS ENGLISH É É É 30 33 49 58 ||||||||||||| |||||||||||||| ||||||||||||| ||||||||||||| Press the ( ) key to enter clock setup menu. Use digit keys to key in desired time, starting from hour then minutes. For single digit, key in 0 follow by the digit. To display time, highlight DISPLAY and select YES. TV SETUP DISPLAY TIME SETTING TELETEXT TIME DOWNLOAD YES 12:10 NO CLOCK SETUP VIA TELETEXT TIME DOWNLOAD (will only work for models with Teletext feature only) Alternatively, if there are channels broadcasting teletext, you could download the teletext time to your clock. In this way the displayed time will follow that of Teletext transmission. Highlight TELETEXT TIME DOWNLOAD and select YES. TV SETUP DISPLAY YES TIME SETTING 00:00 TELETEXT TIME DOWNLOAD YES DOWNLOAD CHANNEL TV 5 ||||||||||||||| TIME OFFSET 0 Highlight DOWNLOAD CHANNEL and select a teletext transmission channel number with the digit keys. If there is a difference in the time zone from the teletext time, highlight TIME ( ) or ( ) key enter the difference in time. To OFFSET and using the display the time, highlight DISPLAY and select YES. Note: The downloaded time will only take effect the next time you switch on the TV. 12 p8-12 12 2/4/05, 12:18 PM TV SETUP SUB-MENUS. . . CON'TD BRIGHTNESS/COLOUR/CONTRAST/SHARPNESS/TINT Enter the TV SETUP menu and highlight accordingly. Preset the TV by adjusting the brightness, colour, contrast, sharpness or tint (applicable for NTSC signal only) of the picture. All these 5 items are also accessible to users via the MENU key for personal settings. ROTATION (only for 29HT model) Adjust the tilt effect of the picture on screen. SCAVEM (only for 29HT model) Scan Velocity Modulation feature produces sharper and crispier picture. However, this feature may cause text display to be too sharp, hence more difficult to read. [. . . ] The cursor will appear in the first character position. To input characters, press the ( ° ) or ( ¸ ) key to select from the list:- A to Z, 0 to 9, , ­, ·, /, :, =, ?, ;, <, >, @ or space. Press the ( ) key to go to the next character position or the ( ) key to go to the previous character position. TO EXIT LINE 1: Press the MENU key. 16 p13-19 16 2/4/05, 12:19 PM TO CREATE MESSAGE WITH LINE 2: Highlight LINE 2 with the ( ¸ ) key. The cursor will appear in the first character position. [. . . ]