User manual PHILIPS 21PT1557

[. . . ] Fit new fuse which should be a BS1362 5A, A. S. T. A. In order to maintain conformity to the EMC directive, the mains plug on this product must not be removed. Connecting the aerial The aerial should be connected to the socket marked : at the back of the set. An inferior aerial is likely to result in a poor, perhaps unstable picture with ghost images and lack of contrast. [. . . ] Digit keys Direct access to the programmes. For a 2 digit programme, enter the 2nd digit before the dash disappears. Selection of EXT socket Sleeptimer (only available on certain version) To select the length of time before the set automatically switches to standby (from 0 to 240 minutes) Teletext (only available on certain versions) Direct access to the items Coloured areas are displayed at the bottom of the screen. The 4 coloured keys are used to access the items or corresponding pages. Contents Press d to return to the contents page (usually page 100). Enlarge a page Press x several time to enlarge the page. Stop sub-page acquisition Certain pages contain sub-pages which follow on automatically. Hidden information (games solutions) Press y to display or hide the concealed information. Teletext call Press the c key to call teletext, change to transparent mode and then exit. The summary appears with a list of items that can be accessed. If the channel selected does not broadcast teletext, the screen remain black. Selecting a page Enter the number of the page required using the 0 to 9 or @ P # keys (always 3 digits). The number is displayed top left, the counter turns and then the page is displayed. Repeat this operation to view another page. If the counter continues searching, the page is not transmitted. 2 Manual store This menu is used to store the programmes one at a time. é With the î key, select Manual Store and press ¬. Use the îÏ keys to select a setting and the Ȭ keys to adjust. : ` Search: press ¬. The search starts. Once a programme is found, the scanning stops. If you know the frequency of the required programme, this can be entered directly using the 0 to 9 keys. If no programme is found, see Tips chapter at the end of the instruction for use. ( Program No. : enter the required number with the Ȭ or 0 to 9 keys. [. . . ] No picture or no sound Have you connected the aerial socket properly?Standby If the set receives no signal for 15 mins, it automatically goes into standby mode. In standby mode, your TV consumes less than 5W depending on model. [. . . ]