User manual PHILIPS 21PT1664-05S

[. . . ] When setting up your television set for the first time, we advise you to use the quick installation guide included below. Please read the following instructions carefully to familiarise yourself with all the features available on your set. We hope our technology meets entirely with your satisfaction. Recycling The materials used in your set are either reusable or can be recycled. [. . . ] If programme 1 does not have teletext, the update will not take place. And enter the number of the programme required. Select START TIME and enter the time at which the set is to switch on. Ú Press to put the set into standby mode. The set switches off automatically after 4 hours if no further commands are given. Depending on the model, there are 2 different versions of the remote control. Brings up the previous or following programme. For direct access to programmes For a 2-digit programme number, the second digit must be entered before the dash disappears. On certain programmes, the title of the programme is displayed for a few seconds at the bottom of the screen. To view a programme which has been locked, you must enter the confidential code number (see p. Hold down for 5 seconds to permanently display the programme number. Press quickly to display or remove the programme number, the time and the sound mode (stereo models only). To access a series of settings: RICH (when the room is very light), NATURAL (optimum conditions), SOFT (when the room is very dark) and return to Volume Mute Smart sound controls Smart picture controls To call up or exit from the menus. The menus disappear automatically after 30 seconds if no further command is given. The key allows the picture to be enlarged vertically to get rid of the black bands around cinema-format films. The key allows the picture to be compressed vertically (16:9 format). activates/deactivates the surround sound effect. In stereo, this gives the impression of the loudspeakers being further apart. in mono , a stereo spatial effect is simulated. To switch from STEREO (and NICAM STEREO) programmes to MONO or, for bilingual transmissions, to choose between DUAL f and DUAL g (and NICAM DUAL f, NICAM DUAL g and mono). Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc. [. . . ] This key is only available on the remote control shown opposite. For the following commands, press and: standby, / enter a number, bring up the video recorder menu*, select*, set*, OK confirm*. P select programme, v record, s rewind, u stop, q play, r fast forward, G programming*, · Some programming features are not available on all video recorders (cursors, menu, OK key, etc. The video recorder is compatible with our own-brand video recorders as well as with all the models using the RC5 standard. [. . . ]