User manual PHILIPS 21PT2324

[. . . ] Colour television 21PT2324 21PT2324 Operating instruction IMPORTANT Before you begin: Make sure your package includes the following items:TV and mains cord, remote control, Instruction manual, antenna cable (optional) and Coaxial cable (optional). Attention: 1. Read your manual first ­ your Philips TV comes with a well-designed remote control and onscreen display to ensure your TV is easy to operate. The tips provided in this manual will save you time and money as charges for TV installation and adjustments of customer controls are not covered under the warranty. 3. For information outside of this manual, such as sales locations and other Philips products, please visit www. philips. com which will automatically link you to your local Philips website. [. . . ] All the available TV channels will be stored. The display shows the progress of the search and the number of channels found. At the end of the search, the menu disappears. To exit or interrupt the search, press . If no channels are found, consult the possible solutions on p. 11. Installation Operating manual-21PT2324 5 Manual Store This menu is used to store channels one at a time. & Press the é With the cursor, select the Install menu and follow by the Manual Store. ` Sound System: use the or key to select the desired sound system; Auto, BG, I, DK or M. Once a channel is found, the scanning stops. If no picture is found, consult the possible solutions (p. 11) § Channel: enter the required channel with the , or digit keys. Fine Tune: if the reception is not satisfactory, adjust using the or keys. ç Repeat steps " to ` for each channel you wish to store. 0To quit the menus, press . " Colour System: use the or key to select the desired colour system; Auto, PAL, Secam D/K, NTSC 3. 58 or NTSC 4. 43. Channel edit This feature allows you to skip or edit channels which have bad or weak TV signal or channels you do not watch often. Once a channel is skipped, you cannot have access to it by the Channel + or ­ key. You can only access the channels by the digit (0-9) keys. The Main menu is displayed on the screen. é With the cursor, select the Install menu followed by the Channel Edit menu. " Enter into the menu and select the channel number you wish to skip by the digit keys. ( Repeat steps " and ` for each channel you wish to skip. § To quit the menus, press . To restore skipped channels & Repeat steps & to " above. é Use the key to select Skipped and the key to select Off. " Repeat steps & and é for each channel you wish to skip. [. . . ] Poorly connected aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). No sound If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. Colour patches on screen Switch off the TV by the mains power button and wait for about 20 minutes before switching on again. Good picture but no sound Try to increase the volume level. [. . . ]