User manual PHILIPS 21PT5408

[. . . ] English 1 Türkçe Slovencina Cestina Polski PyccÍËÈ Magyar Français Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. [. . . ] Contrast: this changes the difference between the light and dark tones. Sharpness: this changes the picture definition. Store: to store the picture adjustments and settings (as well as the settings for Contrast + and NR in the Features menu). é Use the îÏ keys to select a setting and the Ȭ keys to adjust. " Once the adjustments have been made, select Store and press ¬ to store these changes. Bass: this alters the low frequency sounds. Balance: this balances the sound on the left and right speakers. Delta Volume*: this is used to compensate any volume discrepancies between the different programs or EXT sockets. AVL* (Automatic Volume Leveller): this is used to limit increases in sound, especially on program change or advertising slots. Store: this is used to store the sound settings. : see next page " Contrast +: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black. ` NR: attenuates picture noise (snow) in difficult reception conditions. Caution: to store the Contrast + and NR settings, use the Store choice in the Picture menu. ( Rotation (only available on very large screen sets): large screen sets are sensitive to terrestrial magnetic field variations. This setting is used to compensate for this by adjusting the picture rotation. This menu lets you use the TV set as an alarm. This setting is also available via the ` key on the remote control. If this program does not have teletext, the update will not take place. : enter the number of the programme for the wake-up alarm. For models equipped with a radio, you can select an FM station by using the Ȭ keys (the 09 keys are only used to select TV programs). Once for a single alarm, · By combining the TV lock and Timer functions, you can restrict the period during which the TV set is used, for example by your children. You can block certain programs or inhibit use of the TV set completely by locking the keys. [. . . ] 5) or modify the orientation of the outside aerial. Does your antenna enable you to receive broadcasts in this frequency range (UHF or VHF band)?No picture If the television does not switch on, please press the standby key b (located on the remote control) twice. Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). [. . . ]