User manual PHILIPS 230WP7NS

[. . . ] e-Manual Philips LCD Monitor Electronic User's Manual file:///D|/My%20Documents/dfu/230WP7/english/230wp7/index. htm2006-01-10 3:34:25 PM Safety and Troubleshooting Information · Safety Precautions and Maintenance · FAQs · Troubleshooting · Regulatory Information · Other Related Information Safety and Troubleshooting Information Safety precautions and maintenance WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor: Operation: q q q q q q q q Keep the monitor out of direct sunlight and away from stoves or any other heat source. Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor's electronics. Do not block the ventilation holes on the cabinet. When positioning the monitor, make sure the power plug and outlet are easily accessible. [. . . ] Check to see if the monitor cable has bent pins. Make sure the computer is turned on. q AUTO button not working properly q The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. It may not work properly if using nonstandard PC or video card. Imaging Problems Press the Auto button. Adjust the image position using the Phase/ Clock of More Settings in OSD Main Controls. q q Display position is incorrect file:///D|/My%20Documents/dfu/230WP7/english/230wp7/safety/saf_troub. htm (1 of 3)2006-01-10 3:34:50 PM Troubleshooting q Image vibrates on the screen Vertical flicker appears q q Check that the signal cable is properly connected to the graphics board or PC. Press the Auto button. Eliminate the vertical bars using the Phase/ Clock of More Settings in OSD Main Controls. Horizontal flicker appears q q Press the Auto button. Eliminate the vertical bars using the Phase/ Clock of More Settings in OSD Main Controls. q The screen is too bright or too dark Adjust the contrast and brightness on OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer). q An after-image appears If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours q An after-image remains after the power has been turned off. This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The afterimage will disappear after a peroid of time. q Green, red, blue, dark, and white dots remains The remaining dots are normal characteristic of the liquid crystal used in today's technology. file:///D|/My%20Documents/dfu/230WP7/english/230wp7/safety/saf_troub. htm (2 of 3)2006-01-10 3:34:50 PM Troubleshooting For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. RETURN TO TOP OF THE PAGE file:///D|/My%20Documents/dfu/230WP7/english/230wp7/safety/saf_troub. htm (3 of 3)2006-01-10 3:34:50 PM Regulatory Information · TCO'99 Information · TCO'99 Environmental Requirements · TCO'03 Information · Recycling Information for Customers Waste Electrical and Electronic · EquipmentWEEE CE Declaration · of Conformity Automatic · Power Saving · Federal Communications Commission (FCC) Notice (U. Only) · Commission Federale de la Communication (FCC Declaration) · EN 55022 Compliance (Czech Republic Only) · MIC Notice (South Korea Only) · Polish Center for Testing and Certification Notice · North Europe (Nordic Countries) Information · BSMI Notice (Taiwan Only) · Ergonomie Hinweis (nur Deutschland) Regulatory Information TCO '99 Information Congratulations!You have just purchased a TCO '99 approved and labeled product!Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labeled computers? In many countries, environmental labeling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of electronics equipment, most of these potentially damaging substances sooner or later enter nature. There are also other characteristics of a computer, such as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e. g. acidic and climate-influencing emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running continuously and thereby consumes a lot of energy. What does labeling involve? This product meets the requirements for the TCO'99 scheme which provides for international and environmental labeling of personal computers. The labeling scheme was developed as a joint effort by the TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy Administration). [. . . ] box 2687Santiago de Chile Phone: (02)-730 2000 Fax : (02)-777 6730 file:///D|/My%20Documents/dfu/230WP7/english/warranty/warcic. htm (4 of 11)2006-01-10 3:35:22 PM Consumer Information Centers COLOMBIA Industrias Philips de Colombia S. A. -Division de Servicio CARRERA 15 Nr. 104-33 Bogota, Colombia Phone:(01)-8000 111001 (toll free) Fax : (01)-619-4300/619-4104 MEXICO Consumer Information Centre Norte 45 No. 669 Col. Industrial Vallejo C. P. 02300, -Mexico, D. F. Phone: (05)-3687788 / 9180050462 Fax : (05)-7284272 PARAGUAY Av. [. . . ]