User manual PHILIPS 23HF5474

[. . . ] If the fuse is lost, make contact with your retailer in order to verify the correct type. Refit the fuse cover In order to maintain conformity to the EMC directive, the mains plug on this product must not be removed. connecting the aerial at the back of the set. An inferior aerial is The aerial should be connected to the socket marked likely to result in a poor, perhaps unstable picture with ghost images and lack of contrast. [. . . ] Remove the cover at the back of the remote control. Insert the correct type and size batteries into the compartment making sure they are the right way around. You can secure your batteries by fastening an appropriate screw into the hole of the battery cover. An indicator on the front of the TV lights up and the screen comes on. When the set is in the High Security Mode, the Setup menu can be accessed only with an Institutional Set-up Remote Control (RG4172BK or RC2573). When the set is in the Standard Security Mode, the Set-up Menu may be accessed either with an Institutional Set-up Remote Control, or with a guest remote control (like the RC2886) using an authorized access code. The current menu item can be selected by means of the cursor up and cursor down keys. Submenus can be accessed from menu items with a ">" symbol pressing the cursor right key. TELEVISION up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in menu mode and the television reacts the same way as in TV mode. Clock Setup: The Clock set-up menu can be entered from this menu item (this menu option is only available on certain LCD TV models). When this menu is open, all the protections are inactive. : The program type can be selected with the cursor left/right buttons. These buttons will toggle between all available types: "TV", "INFO", "PAYTV" and "RADIO". If the program number of a certain type is 0, the corresponding type is not displayed. In order to display a program number of the above-mentioned types, always enter two numbers, for example: "01" for TV1 or digit "1" and up/down cursor. Some input sources may not be available on certain sets (see accompanying table). Note: When a SmartCard XPress Box is used, it is usually connected to Scart1. Right cursor starts an auto search; during frequency entry the digits not yet entered are displayed as dashes "-". Enter "0" for frequencies below 100 MHz. Label: This menu item will be used to add a label/name for each program. O Pressing the left/right buttons you may enter or exit the label field; pressing the up/down cursor you may insert alphanumeric characters. Store: The present program information is stored after pressing the cursor left/right button. [. . . ] Download Program: This menu item is used to select the channel from which to retrieve the correct time from the Teletext. Time Offset: This menu item is used to set the offset needed to adjust the time received from the Teletext channel to represent the current time in the current location. + Info To move up or down an Info channel. + Radio To move up or down a Radio channel. [. . . ]