User manual PHILIPS 23PFL5322

[. . . ] English www. philips. com/support Model Serial Country Austria Belgium Czech Rep Denmark Finland France Germany Greece Hungary Ireland Italy Luxemburg Netherlands Norway Poland Portugal Slovakia Spain Sweden Switzerland UK Number 0810 000205 078250145 800142840 3525 8759 09 2311 3415 0821 611655 0900 1101211 0 0800 3122 1280 0680018189 01 601 1777 840320086 40 6661 5644 0900 8407 2270 8111 0223491504 2 1359 1442 0800004537 902 888 784 08 5792 9100 0844 800 544 0845 601 0354 Tariff 0. 07/min 0. 06/min free local local 0. 09/min 0. 10/min free free local 0. 08/min local 0. 10/min local local local free 0. 10/min local local local This information is correct at the time of press. For updated information, see www. support. philips. com Information for users in the UK (not applicable outside the UK) Positioning the TV For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. cannot obstruct the air flow through the ventilation apertures. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. [. . . ] : Reference mode for living room conditions and average signals. Suitable for living room viewing. Soft. Rich or Soft Multimedia Personal Multimedia : Best for graphical applications. Personal : Pictures settings are set to your preference. The Smart Sound feature offers you the following sound settings : Theatre, Music, Voice, and Personal. Press the button repeatedly to cycle through the settings to select your desired mode. Music Theatre Voice Personal Definition of Sound Settings Theatre : Emphasize sensation to action (Bass and Treble boosted). Music Voice : Emphasize low tone (Bass boosted). : Emphasize high tone (Treble boosted). Personal : Sound settings are set to your preference. NOTE : The Personal setting is configured by using the Picture/Sound menu in the main menu. This is the only setting in the Smart Picture/Sound settings that can be changed. All other settings are pre-set at the factory. or 9 English Using the Contrast+ and Sleeptimer Features English Screen Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the left and right of the screen. This function allows you to optimise the picture display on screen. If your television is a 4:3 screen Press the ë key (or Î ï) to select the different modes. 4:3 This format is recommended if you want to display the 4:3 picture using the full surface of the screen. Expand 4:3 When this format is selected, the picture is vertically expanded, thus reducing the horizontal black bars. Compress 16:9 The format is recommended if you want to compress full screen movie images into letterbox format. When this format is selected, black horizontal bars can be seen at the top and bottom of the TV screen. If your television is a wide screen Press the ë key (or Í Æ) to select the different modes. This TV set is also equipped with automatic switching which will select the correct screen format, provided that the specific signals are transmitted with the programmes. 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Zoom 14:9 The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture. Zoom 16:9 The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format). Subtitle Zoom This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible. Superwide This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture. [. . . ] (see "Connecting your Computer" on page 17). · Check whether the source is correctly selected. Press button to enter Source list and select the correct source. · Check whether you have configured the computer on a compatible display resolution (see "Connecting your Computer" on page 17). [. . . ]