User manual PHILIPS 24PW6005

[. . . ] Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . [. . . ] The TIMER menu appears : · · · · PICTURE SOUND FEATURES INSTALL FEATURES TIMER · TIME · START TIME · STOP TIME · PROG; NO; · ACTIVATE 10:56 " Press L to enter and exit the sub-menus and use keys IJ to adjust: ` TIME: enter current time. Note: the time is updated automatically each time the set is switched on using teletext information taken from programme 1. If programme 1 does not have teletext, the update will not take place. è PROG; NO;: enter the number of the programme required. ACTIVATE: you can set the alarm to be activated: · ONCE ONLY for a one-off alarm, · DAILY for a daily alarm or · STOP to cancel. ç Press R to set the TV to standby. It will automatically switch on at the time programmed. If you leave the TV switched on, it will only change programme at the time indicated. The combination of the CHILD LOCK and TIMER functions may be used to limit the length of time your television is in use, for example, by your children. Locking the set You can bar access to certain programmes or completely lock the set by locking the keys. é Select FEATURES (J) and press L. (J) and press L. · · · · PICTURE SOUND FEATURES INSTALL Locking programmes FEATURES · TIMER · CHILD LOCK · PARENTAL CONT · ROTATION ACCES CODE ---- ` Enter your confidential access code. The first time, enter the code 0711 then confirm by re-entering 0711. The menu appears. § Use keys IJ to select the required programme and confirm with L. The symbol + is displayed alongside the programmes or sockets that have been locked. To watch a programme which has been locked you will now need to enter the confidential code; otherwise the screen will remain blank. Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket. To unlock all programmes Repeat stages & to ` above, then select CLEAR ALL and press L. To change the confidential code Repeat stages & to ` above, then: ( Select CHANGE CODE and enter your own 4-digit number. è Press R to exit from the menus. If you have forgotten your confidential code, enter the universal code 0711 twice. & Press H, select FEATURES (J) and press L. é Select CHILD LOCK (J) and press L to set the lock to ON. " Switch off the set and put the remote control out of sight. The set cannot be used (it can only be switched on using the remote control). [. . . ] NICAM sound: Process by which digital sound can be transmitted. System: Television pictures are not broadcast in the same way in all countries. There are different standards: BG, DK, I, and L L'. The SYSTEM setting (p. 6) is used to select these different standards. This is not to be confused with PAL or SECAM colour coding. [. . . ]