User manual PHILIPS 24PW6324-05R

[. . . ] Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly advise you read it thoroughly. We hope our technology meets entirely with your satisfaction. [. . . ] Press and repeat the operation for each programme you wish to name. Use the keys to select an adjustment and The key is used to exit from the menu displayed. Three options are available here: COOL (blue white), NORMAL (balanced) or WARM (red white). AVL (automatic volume leveller): used for automatic level control in order to avoid sudden increases in volume (particularly when changing channels or during advertisements). â· HEADPHONES: this menu is used to access the separate headphone VOLUME control, the BALANCE and the SOUND MODE (you can choose between DUAL I and DUAL II for bilingual transmission). Adjustments made in the PICTURE and SOUND menus and to volume are stored automatically. Values are stored under PERSONAL in the picture and sound smart controls ( and keys). LOCK: Set to ON to lock the television keys. Switch off the TV and hide the remote control. The TV cannot now be used (only the remote control will enable you to switch the TV on). NR (Noise Reduction): Useful in case of poor reception to reduce picture noise (snowy picture). This menu allows you to use your TV as an alarm clock. Use the key to select the following settings: TIME: enter the current time ( or keys). If the TV set does not feature teletext, this update will not occur. NO (programme number): enter the number of the programme. START TIME: enter the time at which you wish the TV to switch on. Use to activate the programming ONCE or DAIL for every dayY. If you leave the TV switched on, it will only change programme at the time indicated. The combination of the LOCK and TIMER functions may be used to limit the length of time your television is in use, for example, by your children. The ONCE position allows you to programme the start time or the stop time (but not the both) The key, located on the side of the remote control is used for the main functions of the video recorder. Hold down the standby, / enter a programme number, display the VCR menu* selection* adjustment* P programme selection, record, rewind, stop, play, fast forward, programming (on certain models), oK validation. * Some programming functions are not available on all models (cursors, menu, OK key, etc. [. . . ] WIDE SCREEN Mode This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display. Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally. Different modes can be selected to suit different picture formats, use the following diagrams as a guide to which mode to use. There are 4 possible modes for this type of picture The television has 2 external sockets situated at the back of the set (EXT1 and EXT2). [. . . ]