User manual PHILIPS 26PF3320

[. . . ] For the best results, choose a position where light does not fall directly on the screen, and at some distance away from radiators or other sources of heat. Leave a space of at least 5 cm all around the TV for ventilation, making sure that curtains, cupboards etc. Cannot obstruct the air flow through the ventilation apertures. The TV is intended for use in a domestic environment only and should never be operated or stored in excessively hot or humid atmospheres. [. . . ] If no picture is found, consult the possible solutions (p. Use the keys to move around the name display area (5 characters) and the <> keys to select the characters. When the name has been entered, use the key to exit. Note: on installation, the programs are named automatically when an identification signal is sent. é Use the <> keys to select a setting and the keys to adjust. Brightness: this changes picture brilliance. Contrast: this changes the difference between the light and dark tones. Sharpness: this changes the picture definition. é Use the <> keys to select a setting and the keys to adjust. " Once the adjustments have been made, select Store and press to store these changes. Balance: this balances the sound on the left and right speakers. Delta Volume: this is used to compensate any volume discrepancies between the different programs or EXT sockets. AVL (Automatic Volume Leveller): this is used to limit increases in sound, especially on program change or advertising slots. You can also access these settings with key Q. Store: this is used to store the sound settings. You can adjust: é Contrast +: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture to black. " NR: attenuates picture noise (snow) in difficult reception conditions. The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimise the picture display on screen. Press the key (or ) to select the different modes: This TV set is also equipped with automatic switching which will select the correct-screen format, provided the specific signals are transmitted with the programmes. 4:3 The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. [. . . ] you can improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial Have you connected the aerial socket properly?Poorly connected euroconnector cables or aerial sockets are often the cause of picture or sound problems (sometimes the connectors can become half disconnected if the TV set is moved or turned). If on certain channels you receive a picture but no sound, this means that you do not have the correct TV system. [. . . ]