User manual PHILIPS 27-COLOR TV W-PIP-REMOTE-DBX STEREO 27PS60S

[. . . ] Read this manual first! Congratulations on purchasing this Philips product. We've included everything you need to get started. If you have any problems, Philips Representatives can help you get the most from your new product by explaining: · Hookups, · First Time Setup, and · Feature Operation. Do not attempt to return this product to the store. For fast help, call us first! [. . . ] When finished, press the STATUS /EXIT button to remove the menu from the TV's screen or let the option time out and disappear from the TV screen. CC Off CC 1 3 CC 2 SMART HELP Not all TV programs and product commercials are made with Closed Caption (CC) information included. Neither are all Closed Caption modes (CC1, or CC2) necessarily being used during the transmission of a closed caption program. Refer to your area's TV program listings for the stations and times of Closed Caption shows. VOL 2 CC Mute 1 NOTE: The CC MUTE option can be used to set the TV to turn the Closed Caption mode "ON" whenever the MUTE button on the remote is pressed. This activates the CC1 option. 22 USING THE AUDIO/VIDEO INPUT JACKS Let's Look Inside! T he TV's Audio/Video Input jacks are for direct picture and sound connections between the TV and a VCR (or similar accessory device) that has Audio/Video Output jacks. Connect one end of the VIDEO (yellow) CABLE to the AV1 in VIDEO jack on the back of the TV. Then connect one end the AUDIO (red and white) CABLES to the AV1 in AUDIO L and R(left and right) jacks on the rear of the TV. Connect other end of the VIDEO (yellow) CABLE to the VIDEO OUT jack on the back of the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR. Press the CH + or ­ buttons on the remote to scroll the channels until AV1 appears in the upper left corner of the TV screen. Slide the TV/VCR/ACC switch to the VCR position. Now your ready to place a prerecorded video tape in the VCR and press the PLAY button. VOL 1 Monitor out AV1 in BACK OF TV AV2 in 75 VIDEO L/ Mono AUDIO R COMPONENT VIDEO INPUT Y S-VIDEO Monitor out AV1 in COMPONENT VIDEO INPUT Pb AV2 in 75 VIDEO L/ Mono AUDIO R Y S-VIDEO Pb Pr Pr VIDEO IN (YELLOW) IF YOU ARE USING A MONO DEVICE, USE ONLY THE AUDIO L/MONO JACK. AUDIO IN (RED/WHITE) 2 OUT OUT 5 ANTENNA IN R AUDIO L VIDEO ANTENNA OUT IN IN BACK OF VCR 6 3 VCR (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS) 4 23 Let's Look Inside! USING THE AUDIO/VIDEO (MONITOR) OUTPUT JACKS T he Audio/Video (Monitor) Output jacks are great for recording with a VCR or used to connect an external audio system for better sound reproduction. For an external audio system, connect one end of the R(ight) and L(eft) AUDIO (Monitor Out) jacks on the TV to the R and L audio input jacks on your amplifier or sound system. Set the audio system's volume to a normal listening level. For Stereo System: BACK OF TV 1 Monitor out AV1 in COMPONENT VIDEO INPUT AV2 in 75 VIDEO L/ Mono AUDIO R Y S-VIDEO Monitor out AV1 in COMPONENT VIDEO INPUT Pb AV2 in 75 VIDEO L/ Mono AUDIO R Y S-VIDEO Pb Pr Pr 1 AUDIO IN (RED/WHITE) Turn the TV and audio system ON. You can now adjust the sound level coming from the audio system with the VOLUME (+) or (­) button on the TV or remote control. To connect a second VCR for recording: Connect one end of the yellow Video Cable to the Monitor Out VIDEO plug. Connect the other end to the VIDEO IN plug on the second VCR. Connect one end of the red and white Audio cable from the Monitor Out AUDIO L and R plugs on the TV to the AUDIO IN plugs on the VCR. Turn the VCR ON, insert a blank VHS tape and it's ready to record what's being viewed on the TV screen. R L AUX/TV INPUT PHONO INPUT External audio System 2 For Second VCR: BACK OF TV 3 75 Monitor out AV1 in COMPONENT VIDEO INPUT AV2 in VIDEO L/ Mono AUDIO R Y S-VIDEO Monitor out AV1 in COMPONENT VIDEO INPUT Pb AV2 in 75 VIDEO L/ Mono AUDIO R Y S-VIDEO Pb Pr Pr IF YOU ARE USING A MONO DEVICE, USE ONLY THE AUDIO L/MONO JACK. IF A DUMMY JACK IS PLUGGED INTO THE AUDIO R, NO SOUND WILL BE HEARD. AUDIO IN (RED/WHITE) VIDEO IN (YELLOW) ANTENNA IN OUT OUT 4 OUT OUT ANTENNA IN BACK OF VCR ANTENNA OUT VIDEO L AUDIO R R AUDIO L VIDEO ANTENNA OUT IN IN IN IN 5 BACK OF VCR VCR Number Two VCR Number One 24 USING THE S-VIDEO INPUT JACKS Let's Look Inside! T he S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections. NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page. Connect one end of the S-VIDEO CABLE to the S-VIDEO jack on the back of the TV. [. . . ] From 90 days to one year from the day of purchase, all parts will be repaired or replaced free, but you pay for all labor charges. From one to two years from the day of purchase, you pay for the replacement or repair of all parts except the picture tube, and for all labor charges. After two years from the day of purchase, you pay for the replacement or repair of all parts, and for all labor charges. All parts, including repaired and replaced parts, are covered only for the original warranty period. [. . . ]