User manual PHILIPS 28CE6591

[. . . ] Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). Insert the two R6-type batteries (supplied) making sure that they are the right way round. check that the mode selector is set to TV. [. . . ] AVL (Automatic Volume Leveller): automatic volume control used to avoid sudden increases in volume, particularly when changing programmes or during advertisements. This menu allows you to balance the sound between the different speakers. A continuous sound is emitted in turn from each channel : left, right, centre and rear Remark : the rear channel only appears if surround speakers are connected to the TV set. to change the surround mode , press the ) key. " Select BALANCE, CENTRE or REAR and use the KL keys to adjust the level of each channel independently. The sequence stops while the level is being changed and then automatically starts up again. Levels may also be adjusted without using the test signal. This menu allows you to select the different surround modes. For each setting, the active loudspeakers are displayed on screen. Remark : the DOLBY PRO LOGIC and HALL SURROUND modes are only availables if surround loudspeakers are connected to the TV set. This TV set is also equipped with automatic switching which will select the correct surround mode, provided the specific signals are transmitted with the programmes. The first time, enter the code 0711 then confirm by re-entering 0711. § Use keys IJ to select the required programme and confirm with L. To watch a programme which has been locked you will now need to enter the confidential Code; otherwise the screen will remain blank. the INSTALL menu access is also locked. Caution: in the case of encrypted programmes which use an external decoder, it is necessary to lock the corresponding EXT socket. To unlock all programmes Repeat stages & to ` above, then select CLEAR ALL and press L. To change the confidential code Repeat stages & to ` above, then: ( Select CHANGE CODE and enter your own 4-digit number. If you have forgotten your confidential code, enter the universal code 0711 twice. " Switch off the set and put the remote control out of sight. The set cannot be used (it can only be switched on using the remote control). Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. [. . . ] S-VHS Signals: These are 2 separate Y/C video signals from the S-VHS and Hi-8 recording standards. the luminance signals Y (black and white) and chrominance signals C (colour) are recorded separately on the tape. This provides better picture quality than with standard video (VHS and 8 mm) where the Y/C signals are combined to provide only one video signal. NICAM sound: Process by which digital sound can be transmitted. [. . . ]