User manual PHILIPS 28HT5405-05Z

[. . . ] When the set is in the High Security Mode, the Setup menu can be accessed only by a T374AH Institutional Set-up Remote Control (RG4172BK). When the set is in the Standard Security Mode the Set-up Menu may be accessed with a guest remote control (like the RC2882) by a sequence of commands (3 1 9 7 5 3 MUTE). Your television contains material that can be recycled and reused by specialised companies. Please find out about local regulations on the disposal of your old television set. [. . . ] Audio Mute This item can change between "YES" and "NO" to activate or deactivate sound mute. Remarks TELEVISION up/down, INFO up/down, PAY-TV up/down and RADIO up/down are active in menu mode and the television reacts the same way as in TV mode. The Clock set-up menu can be entered from this menu item The Menu items actually displayed depend on whether a LED clock display is available or not. Display Standby (LED only) This menu item will be used to set the intensity of the clock display when the television is in standby mode. Display On (LED only) This menu item will be used to set the intensity of the clock when the television is in the ON mode. time Setting This menu item will be used to set the time for the clock. Teletext Time Download This menu item is used to activate or deactivate the function for automatic time downloading by means of Teletext. Download Program This menu item is used to select the channel from which to retrieve the correct time from the Teletext. When this item is selected the television set tunes to the selected program. Time Offset This menu item is used to set the offset needed to adjust the time received from the Teletext channel to represent the current time in the current location. This item sets the limit for minimum volume allowed for the television set. This item sets the limit for the maximum volume allowed for the television set. When "FORCED", the television can only be switched OFF by means of the main switch or a set-up remote control or by ESP function (Energy Saving Programmability controls the maximum continuous viewing time allowed by the control system). When "STANDARD", the television switches on the previous status, ON or Stand-by. When "STAND-BY", the television always switches on in Stand-by. This command is used to activate or deactivate the stereo feature in stereo sets. To balance the output sound from TELEVISION's speakers left and right To set the treble frequencies of sound output from TELEVISION's speakers. To set the bass frequencies of sound output from television's speakers. If YES, TV programs (1 to 9) are tuned immediately when a digit is pressed. The Automatic Volume Leveller feature is shown as "AVL" in the menu and its valid states are "YES"; "NO". The valid toggle states are "YES" and "NO": if YES, the volume is fixed at a certain volume, if NO, the volume contains 63 discrete values. This is the time-out to enter the second digit for TV program 10 onwards. [. . . ] In order to maintain conformity to the EMC directive, the mains plug on this product must not be removed. Connecting the aerial The aerial should be connected to the socket marked : at the back of the set. An inferior aerial is likely to result in a poor, perhaps unstable picture with ghost images and lack of contrast. make-shift loft or set-top aerials are often inadequate. [. . . ]