User manual PHILIPS 28ML8926

[. . . ] . 16 Installation of the wireless system Philips AD902W . . 19 1 Installing your television set & Positioning the television set Place your TV on a solid, stable surface, leaving a space of at least 5 cm around the appliance. To avoid accidents, do not put anything on the set such as a cloth or cover, a container full of liquid (vase) or a heat source (lamp). The set must not be exposed to water. " Remote control Insert the two R6-type batteries (supplied) making sure that they are the right way round. Check that the mode selector is set to TV. [. . . ] ( To exit from the menus, press R. This menu allows you to balance the sound between the different speakers. & Press H, select SOUND (J) and press L. The SOUND menu appears : SOUND · PICTURE · SOUND · FEATURES · INSTALL · LEVEL · EQUALIZER · SURROUND MODE · DELTA VOLUME · STORE · AVL · CORDLESS DELAY TEST BALANCE CENTRE REAR é Select TEST and press L to set it to ON. A continuous sound is emitted in turn from each channel : left, right, centre and rear 8 Surround modes This menu allows you to select the different surround modes. & Press H, select SOUND (J) and press L. é Select SURROUND MODE and press L. The menu appears : SOUND · LEVEL · EQUALIZER · SURROUND MODE · DELTA VOLUME · STORE · AVL · CORDLESS · DELAY · PICTURE · SOUND · FEATURES · INSTALL 3D SURROUND HALL SURROUND DOLBY PRO LOGIC STEREO DOLBY 3 STEREO " Use the IJ keys to select the relevant surround mode : STEREO, DOLBY 3 STEREO, 3D SURROUND, HALL SURROUND and DOLBY PROLOGIC. For each setting, the active loudspeakers are displayed on screen. Remark : the DOLBY PRO LOGIC and HALL SURROUND modes are only availables if surround loudspeakers are connected to the TV set. . This TV set is also equipped with automatic switching which will select the correct surround mode, provided the specific signals are transmitted with the programmes. This automatic format can also be modified manually with the ) key. Description of the different surround modes You have a direct acces to the surround modes with the ) key Stereo The sound is reproduced on the left and right loudspeakers of the TV set. Dolby 3 Stereo (with stereo source) The sound is distributed over the left, right and centre loudspeakers. This mode is not recommended for mono transmissions (only the central channel is used). è Press R to exit from the menus. If you have forgotten your confidential code, enter the universal code 0711 twice. Locking the keys & Press H, select FEATURES (J) and press L. é Select CHILD LOCK (J) and press L to set the lock to ON. " Switch off the set and put the remote control out of sight. The set cannot be used (it can only be switched on using the remote control). ` To cancel: switch CHILD LOCK to OFF. 10 Teletext Teletext is an information system, broadcast by certain channels, which can be read like a newspaper. It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular programme is being broadcast (cable networks, satellite channels, etc. ). Switch teletext on/off To call up or exit from teletext. When first pressed, the main index page appears with a list of the items available. Each page has a corresponding 3-figure number. If the selected channel does not broadcast teletext, 100 will appear and the screen will remain blank (in this case, exit from teletext and choose another channel). Selecting a teletext page Use keys 0 to 9 or IJ or @ P # to enter the page number required. [. . . ] The surround speakers are producing no sound or distorted sound ?Check that the active speaker and the cordless setting are switched to the same channel (p. 17). Check also that the active speaker indicator lights in green (see step 3 page 16) and that the SURROUND menu is set to ON (p. 17). Check that the mode selector on the side of the remote control is set to TV. [. . . ]