User manual PHILIPS 28PW6816

[. . . ] Introduction Thank you for purchasing this television set. This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. We hope our technology meets entirely with your satisfaction. Table of Contents Installation Installing your television set . [. . . ] To remove these settings, hold R down for 5 seconds. ` Ø TV VCR DVD . i | OE 1 4 7 SMART 2 5 8 0 3 6 9 SMART - ª MENU " · ¢ [ P Ê Æ OK % ¤ Å > Ó OSD Y Á ù 9 w Check that the mode selector on the side of the remote control is set to TV. 16:9 Formats The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). 4:3 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). This function allows you to optimise the picture display on screen. Automatic switching This TV set is also equipped with automatic switching which will select the correct-screen format, provided the specific signals are transmitted with the programmes. This automatic format can olso be modified manually. Using the different screen formats Press the L key (or K) to select the different modes: 4:3, ZOOM 14:9, ZOOM 16:9, SUBTITLE ZOOM, SUPER ZOOM and WIDE SCREEN. You can also access these settings with key P. MENU 4:3 Mode The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. The picture may be progressively enlarged using the IJ keys. ZOOM 14:9 Mode The picture is enlarged to 14:9 format, a thin black band remains on both sides of the picture. The IJ keys allow you to compress vertically the image to view the top or the bottom of the picture (subtitles). ZOOM 16:9 Mode The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures which have black bands at the top and bottom (letterbox format). Use the IJ keys if you wish to display the top or the bottom of the picture. SUBTITLE ZOOM Mode This mode is used to display 4:3 pictures using the full surface of the screen leaving the sub-titles visible. Use the IJ keys to increase or decrease the section at the bottom of the picture. SUPERWIDE Mode This mode is used to display 4:3 pictures using the full surface of the screen by enlarging the sides of the picture. The IJ keys allow you to move the image up or down. WIDE SCREEN Mode This mode restores the correct proportions of pictures transmitted in 16:9 using full screen display. Note: If you display a 4:3 picture in thid mode, it will be enlarged horizontally. 10 Selecting the correct mode Different modes can be selected to suit different picture formats, use the following diagrams as a guide to which mode to use. & 4:3 Picture There are 5 possible modes for this type of picture ZOOM 14 : 9 MENU 4:3 ZOOM 16 : 9 MENU SUBTITLE ZOOM Subtitles SUPERWIDE Progressive zoom é 4:3 Picture Letterbox MENU 4:3 ZOOM 16 : 9 x2 " 16:9 Picture MENU 4:3 WIDE SCREEN x1 11 Using the built-in DVD player The built-in DVD player allows you to play DVD video disks as well as video and audio CDs (including finalised CD-Rs and CD-RWs). The disks can be recognised by their logo on the packaging. Note: Generally, DVD films are not placed on the market at the same time in the various regions of the world. Accordingly, DVD players are provided with geographical zone codes. If you insert a disk which has a regional code that is different from that of your reader, you will see a message displayed on the screen. The disk cannot be played and you will have to remove it. Inserting a disk & Opening the drawer Press the EJECT button twice on the front, to the left of the drawer. The television automatically switches to DVD mode and the drawer opens. " Closing the drawer Gently push the drawer back in or press the EJECT button next to the drawer to close. The disk will begin to play. é Inserting the disk Place the disk in the drawer, with the label facing upwards. Makes sure that it is positioned correctly in the recess. ` Automatic play Play begins automatically when the drawer closes. A status window appears on the left of the screen and indicates the current operation, the type of disk and its length. Next, the content of the disk is displayed. 12 Playing a DVD or video CD w To access the DVD functions you must first switch the mode selector ` Ø TV VCR . i | OE 1 4 7 SMART 2 5 8 0 3 6 9 SMART DVD - ª MENU " · ¢ [ P Ê Æ OK % > Ó OSD ¤ Y Å ù Á located on the side of the remote control to the DVD position. Play Once the disk has been inserted and the drawer closed, play begins automatically. Certain disks will ask you to select a heading from a menu. [. . . ] Check that the mode selector on the side of the remote control is set to TV. If the digital output does not work, check that it has been activated in the OSD menu (see p. Check that the disk does not have any fingerprints on it. Clean it with a soft cloth, wiping from the centre to the edge. [. . . ]