User manual PHILIPS 29PT2552

[. . . ] Please refer to the `Troubleshooting Tips'on page 15 before calling for service. In case of a need to call for service, we recommend you to call from your room where your TV is located and have on hand your remote control, warranty card, TV model and serial number. 6 · · Do not discard packaging materials: without thorough inspection for parts and that accessories that may be packed separately inside the carton. during the warranty period should you need to exchange the set. Recycling: The materials used in your set are either reusable or can be recycled. [. . . ] é With the cursor, select the Install menu and follow by the Language. MENU Auto Store Auto Store This menu is used to store all available channels automatically. é With the cursor, select the Install menu and follow by the Auto Store. MENU " Use the key to start auto store. All the available TV channels will be stored automatically. The display shows the progress of the search and the number of channels found. If no channels are found, consult the possible solutions on p. 15. 6 Manual Store This menu is used to store channels one at a time. é With the cursor, select the Install menu and follow by the Manual. MENU " Colour Sys(tem): use the or key to select the desired colour system; Auto, PAL, NTSC 3. 58 or NTSC 4. 43. ` Sound Sys(tem): use the or key to select the desired sound system; Auto, BG, I, DK or M. Once a channel is found, the scanning stops. If no picture is found, consult the possible solutions (p. 15) § Channel: enter the required channel , or digit keys. with the Fine Tune: if the reception is not or satisfactory, adjust using the keys. ç Repeat steps " to ` for each channel you wish to store. à To quit the menus, press Ë . MENU Sort This feature allows you to rearrange channels according to your preference. · Sharpness: this changes the picture definition. · Hue: this adjusts the skin colour tone in NTSC channel. · Colour Temp. : this changes the colour rendering: Cold(bluer), Normal(balanced) or Warm(redder). · NR: attenuates picture noise (snow) in difficult reception conditions. · Contrast +: automatic adjustment of the picture contrast which permanently sets the darkest part of the picture black. Sound settings & Press , select Sound ( ) and press . The Sound menu will be called up. ge MENU or é Use the and the or " Press Ë to exit. key to select a setting key to adjust. Description of the adjustments: · Treble: this alters the high frequency sounds. · Bass: this alters the low frequency sounds. · Balance: this balances the sound on the left and right speakers. · AVL (Automatic Volume Leveller): this is used to limit increases in sound, especially on channel change or advertising slots. (Incredible Surround): this boost the effect of stereo sound. Active Control adjusts these picture settings continuously and automatically & Enter Features menu as described in "Features settings" on the previous page. [. . . ] Check that the sound is not set to "mute". If it is, press the [ key to restore the sound. Good sound but poor colour or no picture Try to increase the contrast and brightness setting. Snowish picture and noise Check antenna connection at the rear of the TV. [. . . ]