User manual PHILIPS 29PT5006

[. . . ] Real Flat Television User Manual 21PT5006 29PT5006 25PT5016 29PT5016 21PT5026 29PT5026 PHI CONTENTS Introduction Safety information / Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before calling service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic Installation functions TV hookup (Basic connection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Remote control use and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Cursor These 4 keys are used to move around the menus or provide direct access to the different picture formats Volume To adjust the sound level. Digit keys Direct access to the channels. For a 2-digit channel, enter the 2nd digit before the dash disappears. Alternate channel Switches between the current and the previous channel. Standby Lets you place the TV set on standby. To turn on the TV, press CH + or ­, , AV, A/CH or digit keys. AV channel selection Press several times to select AV1, CVI, AV2, YPbPr or Side. Delete Personal Zapping list Deletes stored channels from Personal Zapping list (p. 26) Smart Picture Used to access a series of stored settings: Rich, Natural, Soft, DVD/ VCD or Personal. Not applicable POWER A/ C During stereo transmission, to switch from Stereo to Mono. During dual sound transmission, to switch betwen language or . Channel selection To access the next or previous channel. The number and sound mode are displayed for a few moments whenever you select a new channel. On screen display To display/clear the on screen information. Hold down key for 3 seconds to activate permanent display of channel number. This key is also used to exit from the menu. 9 TV CONTROL FUNCTIONS The TV controls are on the front or the side of the set depending on your model. & é " Mains Power button Standby light indicator Remote Sensor Switches mains power on or off. Indicator is lit when standby mode is activated. Acts as a sensor for activating the controls of the TV when remote control handset is aimed at it. Select channel in descending/ascending order. ` ( Volume + / ­ buttons Channel oe/o buttons Tip: · You can enter the main menu by pressing both the Volume-and+buttons at the same time. · Press the Channel oe or o button to select the next item on the menu. Exit menu from screen. Screen displays may look different on certain models. 14 COLOUR / SOUND SYSTEM This feature allows you to select your desired Colour and Sound system. If Auto is selected, the respective colour and sound system will be automatically selected according to the transmission system. Note: Select your desired colour and sound system manually if reception is poor in Auto mode. Step Press button Colour System is selected. Result on screen Repeat steps 1 to step 5 as in "Manual Tuning of TV Channels" or Select the desired colour system (Auto, PAL, NTSC 3. 58, NTSC 4. 43 or SECAM). [. . . ] Exit menu from screen. Screen displays may look different on certain models. 22 SMART PICTURE Whether you are watching a movie or video game, your TV has automatic video control settings matched to your current program source or content. The Smart Picture feature quickly resets your TV's video controls of program for a number of different types of programs and viewing conditions you may have in your home. Each Smart Picture setting is preset at the factory to automatically adjust the TV's Brightness, Colour, Picture and Sharpness levels. Step Press button Press button repeatedly to cycle through the 5 settings namely, Personal, DVD/VCD, Rich, Natural and Soft and select your desired picture setting. Exit menu from screen. Defintion of Picture settings Personal : Picture settings are set to your preference. DVD/VCD : For optimal picture setting, whenever the source is connected to DVD/VCD player, select DVD/VCD setting for AV mode. Rich : Emphasize very vibrant colours. This setting is the optimal setting when you are viewing TV programmes in a brightlylit room. [. . . ]