User manual PHILIPS 29PT8413

[. . . ] English Contents Installation Your remote control ________________________________________2 Preparation _______________________________________________3 Installation_________________________________________________4 Store TV channels Select the menu language and country ______________________4 Automatic installation ___________________________________5 Manual installation ______________________________________5 Give name_________________________________________________6 Reshuffle the programme list _________________________________6 Select favourite TV channels __________________________________6 Install TV setup_____________________________________________7 The keys in front of the TV ___________________________________7 Operation Use of the remote control __________________________________8-9 Use of the menus Picture menu __________________________________________10 Sound menu___________________________________________10 Features menu _________________________________________12 Teletext _______________________________________________14-15 Connect peripheral equipment _________________________16-20 Tips ____________________________________________________21 Index ___________________________________________________21 Lexicon ________________________________________________22 EasyLink features are based on the "one touch operation" approach. This means that a sequence of actions are executed at the same time in both the television and the video cassette recorder, provided both are fitted with the EasyLink function and connected with the eurocable supplied. 1 English Your remote control p. 9 X j i selection of EXT1, EXT2, EXT3 or FRONT bilingual choice + sound info continuous subtitles info on screen Teletext p. 14 f d h U solution to riddles mix tv/txt picture - hold enlarge subpage selection / time display u f s p. [. . . ] ` Select Stop Test in the DOLBY PRO LOGIC menu and press the OK key when you have finished the adjustments of the level of the speakers. Surround mode Select the Dolby Surround Sound mode according to the sound mode being broadcast. Pro Logic (with Dolby Surround broadcasting) In addition to the left and right front speakers, the centre and the rear surround loudspeakers reproduce the Dolby Surround Pro Logic sounds. This 4-channel sound is always recorded when the movie or programme is marked with Dolby Surround. This mode is especially recommended for such programmes as movies. Dolby 3 Stereo (with Dolby Surround broadcasting) The Dolby 3 Stereo sound signal is now distributed over the front left, the front right and the centre loudspeakers. The rear loudspeakers do not produce any signal. Pro Logic Dolby 3 Stereo Hall (with Dolby Surround broadcasting) The centre sound signal is distributed over the rear loudspeakers which creates a hall effect from the rear. The centre loudspeaker does not produce any signal. This mode is recommended when you wish to add surround sound to a broadcast which is not encoded Dolby Surround. Hall Off This mode reproduces only the left and right front sound signals. You only hear a stereo sound if the broadcast which you are watching or listening to is transmitted in stereo or digital sound. · Off Press the green MENU key to return to the SOUND menu. * `Dolby' `Pro Logic' and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories Licensing Corporation. 11 o p oe MENU OK Select adjustments Features menu & Press the yellow colour key to display/cancel the FEATURES menu. é Use the B keys to select the menu item. " Use the OK key to activate. Activate Picture menu Sound menu Features menu J FEATURES Store PP Sleeptimer Message Child Lock Animation demo Store PP The adjustments of Contrast, Brightness, Colour, Tint, Digital Scan and Contrast Plus made in the picture menu and the adjustments of Volume, Graphic Equalizer and Loudness made in the sound menu can be stored in memory for all the TV channels. Sleeptimer With the sleeptimer you can set a time period after which the TV should switch itself off to standby. The counter runs from Off up to 180 min. One minute before the TV is set to go to standby, the remaining minute appears on screen. You can always switch off your set earlier or change the set time. Child Lock If the child lock is on, the TV can only be switched on with the remote control. The - and + keys on top of the TV cannot be used to select a TV channel. In this way you can prevent unauthorised use of your TV. If the message Child Lock On appears, the child lock must be switched off before you can use the - and + keys on the TV to select a TV channel. Animation demo Selecting this menu item starts a continuous loop of an animation introducing your TV. This animation has no operational function. Press the OK key to stop the animation. 12 FEATURES Store PP Sleeptimer J Message Child Lock Animation demo Message With this function you can enter a personal message on 2 lines which will be displayed automatically when the set is switched on from standby. [. . . ] Automatic Channel Installation (ACI) Automatically installs all TV channels in the same order as offered by your cable company, provided of course that the data is transmitted. It also automatically includes programme number and programme name. With ACI, channel installation is fully automatic, simple and done fast. Child Lock Feature to prevent children from viewing unwanted channels. [. . . ]