User manual PHILIPS 29PT8836

[. . . ] Real Flat Television 29PT8836 User manual IMPORTANT Before you begin: Make sure your package includes the following items:TV and mains cord, remote control, user manual, antenna cable (optional) and Coaxial cable (optional). Attention: 1. Read your manual first ­ your Philips TV comes with a well-designed remote control and onscreen display to ensure your TV is easy to operate. The tips provided in this manual will save you time and money as charges for TV installation and adjustments of customer controls are not covered under the warranty. 3. For information outside of this manual, such as sales locations and other Philips products, please visit www. philips. com which will automatically link you to your local Philips website. [. . . ] § To quit the menus, press . 7 Channel edit This feature allows you to skip or edit channels which have bad or weak TV signal or channels you do not watch often. Once a channel is skipped, you cannot have access to it by the Channel + or ­ key. You can only access the channels by the digit (0-9) keys. The Main menu is displayed on the screen. With the cursor, select the Install menu followed by the Edit menu. Enter into the menu and select the channel number you wish to skip by the digit keys. Repeat steps and for each channel you wish to skip. To quit the menus, press . To restore skipped channels Repeat steps to above. Use the key to select Skipped and the key to select Off. Repeat steps and for each channel you wish to skip. To quit the menus, press . 8 Picture settings & Press then . Note:Timer will be disabled once the set is switched off. & Press , use the key to select Features and press the key. Description of function: Time: enter the current time. Start Time: enter the time for the TV to switch on or to switch channel. Stop Time: enter the time to switch to standby. Note: Is Stop Time is not keyed in, Tv will go to standby mode after 4 hours. To switch on the TV from standby, press Channel + or ­, digit or Power key. Channel: enter the channel to switch to. Activate: enter mode of activating timer; Once, Daily or Off. Display: select On to display the time on the TV screen. " Press the key to exit. é Use the key to select Timer. Child Lock You can block certain channels or inhibit use of the TV set completely. Note:You can only access the locked channels via the remote control. Keep the remote control in a safe place. [. . . ] Double or "Ghost" images Possible poor positioning of antenna. Using a high directional antenna may improve reception. Peripheral equipment gives a black and white picture You have not selected the socket connection to the right channel with the key: for example, AV1 in socket connection should select channel AV1 to playback. To play a video cassette, check that it has been recorded under the same standard (PAL or NTSC) which can be replayed by the video recorder. [. . . ]