User manual PHILIPS 29PT9020

[. . . ] This handbook has been designed to help you install and operate your TV set. We would strongly recommend that you read it thoroughly. Recycling The materials used in your set are either reusable or can be recycled. To minimise environmental waste, specialist companies collect used appliances and dismantle them after retrieving any materials that can be used again (ask your dealer for further details). [. . . ] Sharpness : this changes the picture definition. Digital Scan *: reduces line flicker which is visible on some pictures. DNR Dynamic Noise Reduction *: automatically reduces noise (snowy picture) when receiving weak video signals. Balance : to balance the sound on the left and right speakers. Headphone volume (according to the version) : allows you to adjust the headphones volume independently from the loud-speakers on the TV set. AVL (Automatic Volume Leveller): automatically controls the volume and is used to limit increases in sound, especially during programme changes or advertising. Delta Volume : this is used to compensate any volume discrepancies between the different programmes or EXT connectors. Use the @ P # keys to compare the level of different programmes. Child lock : If the chid lock is on, the TV can only 6 Select On, then turn off the television and hide the remote control. Subtitles : TV channels with teletext often transmit programmes with subtitles. This function activates or disables the automatic display of teletext subtitling, when it is being transmitted. In this case, go straight to step ". & Use the bottom cursor to activate the selection zone on the page. é With the 0 to 9 or @ P # keys, enter the teletext programme page number. If necessary, use the left/right keys to select the sub-pages. " Use the up/down cursor to scroll through the different broadcasts suggested and the coloured keys to activate a NexTView function. ` Press u to return to the selection zone. NexTView Functions Press one of the red, green or yellow keys to activate a NexTView function: The text appears in grey if the function is not available. : automatically turns on the TV set, if it is in standby, or stops a programme from being broadcast by displaying a message if the TV set is on. For these 2 functions, a window appears and the frequency of the recording should be stored by using the cursor and the u key (and in certain cases confirm the channel). for certain broadcasts , the series option is suggested. With this option, the system will independently search for when the next episode in the series is being broadcast. [. . . ] After 30 seconds of no buttons having been pressed the remote will automatically return to tv mode. RGB signals:These are 3 Red, Green and Blue video signals which directly drive the red, green and blue emitters in the cathode ray tube. Using these signals provides better picture quality. NICAM sound: Process by which digital sound can be transmitted. [. . . ]