User manual PHILIPS 32 IN TV STAND TC32PV2

[. . . ] Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require that you contact your dealer or request service. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE. BASIC TV TELEVISION AND REMOTE OPERATION Volume and Channel buttons are located on the top of the television cabinet. Y our television has a set of controls located on the top and front of the cabinet for use when the remote control is not needed. 1 2 3 T Press the POWER button on the front of the TV cabinet to turn the TV ON. Note: With AutoChron ON, the TV will search for a PBS channel to set the clock before powering itself on. [. . . ] PIP - Press to turn PIP (picture-in-picture) on or off or control the size of the PIP window. Power - Press to turn the TV on or off. Active ControlTM - Measures and corrects all incoming signals to provide the best picture-quality settings. Press to turn Active ControlTM on or off. When Active ControlTM is on, it automatically and continuously controls Sharpness and Noise Reduction settings. Picture - Press to select an AutoPictureTM control. Choose from four factory-set controls--Movies, Sports, Weak Signal, and Multimedia--and a PERSONAL control that you set according to your own preferences through the onscreen Picture menu. Menu/Select - Press to display the onscreen menu. Channel (+/­) - Press to select channels in ascending or descending order or cycle through the signal inputs. To restore the sound to its previous level, press the button again. Surf - Press to select previously entered channels. With the TV's AutoSurfTM control, you can place up to 10 favorite channels or sources in memory. Connect the open end of the second cable to the ANT B 75 Input located on the back of the TV. Round 75 Coaxial Cable b P b P Signal Splitter Cable signal coming from Cable Company (Round 75 coaxial cable) Additional Round 75 Coaxial Cables Note: The Signal Splitter and the Round 75 coaxial cables are not supplied with the TV. Cable Box Connections: If your signal comes from a cable company and you use a supplied Cable Box with signal Input/Output Jacks: (This connection will NOT supply Stereo sound to the TV. The sound from the cable box will be mono. ) Cable Box with RF Inputs and Outputs Connection: Cable Signal IN from the Cable Company Signal Splitter Output Channel Switch Jack Panel Back of Cable Box 1 2 3 4 Connect the open end of the round Cable Company supplied cable to Input Jack on an optional Signal Splitter (not supplied). Using two other round 75 cables (not supplied) connect one end of the first cable to one of the outputs on the optional Signal Splitter. Connect one end of the second round 75 cable to the second output on the optional Signal Splitter. Connect the open end of the first cable to the (Cable) Input located on the back of the Cable Box. Connect one end of the second round 75 cable to the ANT B 75 Input on the back of the TV. Connect another round 75 cable to the Output Jack (To TV) located on the back of the Cable Box. Connect the other end of the cable to the ANT A 75 Input on the back of the TV. Round 75 Coaxial Cable b P b P Jack Panel Back of TV Round 75 Coaxial Cable NOTE: Be sure to set the OUTPUT CHANNEL SWITCH on the back of the cable box to CH 3 or 4, then tune the cable box on the TV to the corresponding channel. Once tuned, change channels at the cable box, not the television. Cable Box (w/Audio/Video Outputs): This connection will supply Stereo sound to the TV. Cable Box with Audio/Video Outputs Connection: Cable Signal IN from the Cable Company 1 2 3 4 5 6 Connect the open end of the round Cable Company supplied cable to Input Jack on an optional Signal Splitter (not supplied). Using two other round 75 cables (not supplied) connect one end of the first cable to one of the outputs on the optional Signal Splitter. Connect one end of the second round 75 cable to the second output on the optional Signal Splitter. [. . . ] Press the AV button on the remote control to select the AV1 channel for accessory device number one, or the AV2 channel for accessory device number two. AV1 or AV2 will appear in the upper left corner on the TV screen depending on the channel chosen. With either of the VCRs (or accessory devices) ON and a prerecorded tape (CD, DVD, etc. ) inserted, press the PLAY button to view the tape on the television. VIDEO IN (YELLOW) AV1 Connection AUDIO IN (RED/WHITE) AV2 Connection BACK OF VCR 1 BACK OF VCR 2 VCR TWO (or accessory device) (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS) VCR ONE (or accessory device) (EQUIPPED WITH VIDEO AND AUDIO OUTPUT JACKS) c CHECK IT OUT Note: The Audio/Video cables needed for this connection are not supplied with your TV. Connect the Component (Y, Pb, Pr) Video OUT jacks from the DVD player (or similar device) to the (Y, Pb, Pr) in(put) jacks on the TV. [. . . ]