User manual PHILIPS 32FD9944-69S

[. . . ] The RC out jack next to the VGA 2 connector makes it possible to daisy chain remote control signals to other equipment. This output cannot be used to daisy chain a second monitor. 1 English Note: Stands are optional accessories. Consult your dealer. Monitor Display modes VGA Wide VGA Wide VGA MAC MAC MAC MAC SVGA XGA SXGA 640x480 848x480 852x480 640x480 832x624 1024x768 1152x870 800x600 1024x768 1280x1024 60, 72, 75, 85 Hz 60 Hz 60 Hz 66. 67 Hz 74. 55 Hz 74. 93 Hz 75 Hz 56, 60, 72, 75, 85 Hz 60, 70, 75, 85 Hz 60, 72 Hz When a VGA computer is connected, the display selection is made automatically. A message is displayed when the monitor does not support the connected VGA mode. [. . . ] Note: Sometimes not all the menu items are visible on the screen. Press the cursor down until all the items are displayed. Only when the US English language has been selected (see Setup menu, Language, p. 5), the menu items will be displayed with additional icons. Operation Press the MENU key on the remote control to summon the main menu. Picture 1 menu Brightness This control allows you to adjust the brightness level of the picture. Picture 1 Brightness Contrast Colour temperature Sharpness Contrast This control allows you to adjust the contrast level of the picture. Colour temperature This control allows you to select the colour temperature of the picture. Move the cursor up/down to make a selection. Press the cursor left to return to the Picture 1 menu. Sharpness This control allows you to adjust the edge definition of a picture. Picture 2 menu Picture 2 Format Zoom Zoom factor Shift Clock frequency Phase 4:3 Wide screen In this menu you are allowed to adjust attributes which are relevant for the picture on the display, like format, zoom, size, etc. Format Select Format to summon a list of available display formats for showing images in the traditional 4:3 proportions. Press the cursor up/down to select another display format: 4:3 or Wide screen. Zoom Select Zoom On to activate the zoom function. You may also activate the zoom function with the ZOOM ON/OFF key on the remote control. Press the cursor left/right, up/down to select which part of the screen will be zoomed. Zoom factor Select Zoom factor and press the cursor left/right to adjust the zoom factor and to change the magnification of the picture. If zoom is not active, Zoom Off, changing the magnification factor will have no effect on the displayed picture. 4 Use of the menus Picture 2 Format Zoom Zoom factor Shift Clock frequency Phase 4:3 Wide screen Clock frequency This control allows you, when necessary, to adjust the values of the clock frequency so that especially text can be displayed with an optimal overall sharpness. Shift This control allows you, when necessary, to move the picture in a horizontal or vertical way. & é Use the cursor left/right to adjust. Phase This control allows you, when necessary, to adjust the pixel phase of the picture to avoid picture interference. Use the cursor left/right to adjust. Sound menu Volume This control allows you to adjust the volume level. Sound Volume Bass Treble Sound mode Bass Bass attenuates or amplifies the low-frequency response of the sound of the loudspeakers. Treble Treble attenuates or amplifies the high-frequency response of the sound of the loudspeakers. Sound mode This control allows you to switch between mono and stereo sound. Note: Bass, Treble and Sound mode will not be available when a TV receiver box is connected to the monitor and a VGA source is selected. Setup menu Language Setup Language US English English Nederlands Deutsch Français Español . . . & é " Use the cursor down to select Language. Press the cursor right to enter the list of selectable languages. [. . . ] No picture or no sound Are the supplied cables connected properly?(The power cable to the display, the VGA cables, the audio cables, . . . ) Is your PC or TV receiver box switched on?Do you see a black screen and the indicator on front of the monitor lights up green, this means that the display mode is not supported. Switch your VGA source to a correct mode. [. . . ]