User manual PHILIPS 32FD9954

[. . . ] Mounting Wall Bracket Note: the enclosed template can be used for general positioning only (fig. 1 Note: Bracket can only be used with standard 16" spaced wood wall studs. Bracket must be positioned so that the bracket is fastened firmly to studs at each end. Note: Because the Receiver Unit's power cord is 6', when determining the Display Unit mounting location, the distance to the nearest AC power outlet must be considered. fig. [. . . ] Please check on how to dispose of batteries according to local regulations. Make sure that your TV receiver box and/or PC are switched on and that your PC is in the correct display mode. Switch the monitor on : Press the power key B at the right side of the monitor. A green indicator lights up and the screen comes on. When the monitor does not receive a supported VGA signal and is not connected to a receiver box, the screen switches to standby and the red indicator lights up. When you switch on your monitor for the first time, and the monitor is not connected to a TV receiver box, the language menu automatically appears on the screen. The explanation appears in different languages one at a time. Follow the instructions on screen to select the correct language or see Setup menu, Language, p. 8. é " R6 / AA ` B 4 Use of the remote control VGA press repeatedly to select your computer connected to the VGA 1 or 2 connector or to the DVI-D connector. AV1, AV2, AV3 POWER B AV3 to switch to standby or on again press to select the peripherals connected to the connector indicated on the monitor. B VGA AV1 AV2 BRIGHTNESS CONTRAST ZOOM ON/OFF ZOOM IN ZOOM OUT MENU to switch the menu on/off cursor buttons to select your choice and to alter a selected adjustment. MENU OK BRIGHTNESS +/- OK to activate your choice to adjust the brightness level of the picture CONTRAST +/- to adjust the contrast level of the picture ZOOM ON/OFF MUTE V press - or + to adjust the volume CH/PR V ¬ to activate/de-activate the zoom function. 7. ZOOM IN/OUT to adjust the zoom factor and to change the magnification of the picture when zoom is activated. 7. 1 4 7 AV MUTE 2 5 8 0 3 6 9 q ¬ Mute button Mute the sound or restore it CH/PR Program selection To browse through the sources selected. AV MUTE to mute the picture and the sound or restore it (if the monitor is used in monitor mode). When activated a green indicator starts blinking in front of the monitor. Press the q button to switch between the different picture formats. On screen information When the monitor is used in the monitor mode, information about the active source (AV1, AV2, AV3, VGA1, VGA2 or DVI-D), and the supported video, VGA or HD-format of the selected source is displayed on the screen together with the selected picture format and icons informing about selected sound mode and AV or audio mute. Use of the remote control 5 Use of the menus and the menu system & Picture 1 Brightness Contrast (Color) (Tint) Sharpness Press the MENU button on the remote control to summon the different menu headers. Press the cursor left/right to move the cursor horizontally through the menu headers. Press the cursor down to access the menu. In case of a slider, move the cursor left/right to adjust. In case of a list with options, move the cursor right to enter and use the cursor up/down to select an option. Press the cursor left to leave the options list. Picture 2 G H Sound M Setup º é " C è à Color temp. @ ` Press the MENU button again to switch off the menu. Note: Sometimes not all the menu items are visible on the screen. Press the cursor down until all the items are displayed. Only when the US English language has been selected (see Setup menu, Language, p. 8), the menu items will be displayed with additional icons. Operation Press the MENU button on the remote control to summon the main menu. [. . . ] After bringing the set below 6562 ft it works fine again. Transportation has no influence. Control of peripheral equipment The infrared radiation of the screen may influence the reception sensitivity of other peripherals. Solution: replace the batteries of the remote control or change position of other equipment. keep away a wireless headphone from within a radius of 4. 92 ft. [. . . ]