User manual PHILIPS 32HF5335D-27B

[. . . ] Retain this information for future reference. Com/usasupport or call 1-888-PHILIPS (744-5477) while with your product (and Model / Serial number) How to make the optimal connection (These cables are not provided with the set. (Please use a certified HDMI cable no longer than 15m). HDMI to DVI-I Convertor cable Devices with only a DVI connection can be connected with a DVI to HDMI convertor cable. [. . . ] Note: Subchannel selections - The new standards employed with digital broadcasting make it possible to receive multiple program channels under a single major channel number which can be selected by pressing the digit remote control direct-acces channel number entry. - The number of channels shown at installation includes paid channels but you may not be able to see all of them unless you sign up with cable TV operators. After the installation of the TV channels has been done, always make a selection in the Installation menu between Antenna or Cable whether you want to watch Antenna TV channels or Cable TV channels. If you make use of a signal splitter do not forget to put the switch in the corresponding position. Note: Digital Channel selection delay Due to the tuning complexity of subchannel digital programming, the time to select and view a digital channel may take slightly longer than what the viewer is normally accustomed to (as compared to analog channel programs). Digital channel broadcasts contain program and system data information that must be processed before the channel selection can be displayed. This allows you to automatically tune to and update all available digital channels. Notes: - this will not reinstall uninstalled channels; - digital channels that are not encountered any longer will be removed; - new channels found will not be added to any favorite list; - already installed channels will not be renumbered. This enables you to do a weak ATSC digital channel installation. This is only available for TV channels installed via an antenna connection (see p. & If a certain channel you expect to see is not tuned or is weak, you can install it manually. Call your local broadcasting station to know what channel its being transmitted on. Select that channel in the displayed list of TV channels (in the antenna mode). " The signal strength is displayed and updated continuously as you rotate the This allows you to select the already stored terrestrial or cable TV channels. Choose for Antenna or Cable whether these signals are present. This allows you to uninstall a stored channel so that it is no longer possible to tune to. This also allows you to reinstall an earlier uninstalled channel. " Press the green color button again to reinstall the uninstalled channel. Note : Uninstalled channels are not reinstalled during an installation update. é Select Installation with the cursor down and press the cursor right to select Location This allows you to select the location of your TV. If you choose for Shop it will result in fixed settings of picture and sound. The location Home will give full flexibility to change any predefined settings for picture and sound. [. . . ] POWER ON The Power On function allows the TV to enter a specific mode of operation (On or Standby) after the mains power is activated. ON When set, the TV will always turn ON after the mains power is enabled. STANDBY When set, the TV will always turn to STANDBY after mains power is enabled DISPLAY MESSAGE ON Enables display of the Welcome Message for 30 seconds after the TV set is turned on OFF Disables the display of the Welcome Message. This helps to personalize the hotel experience for guests. [. . . ]