User manual PHILIPS 32HF7445

[. . . ] Better Component Video input Provides superior picture quality by separating the green, blue and red luminance signals. Good S-Video Supplies a better picture than RF and Composite connections. Basic Composite Audio/Video Separate video (yellow) and audio (red/white) cables that provide a basic connection from the cable box and other devices. *After setting up, please run the Auto store function to set up the TV for the broadcast or cable channels available in your area. [. . . ] Program number "0" or "00" are not allowed. Enter the first digit When you enter the first digit, other incomplete number as "0" for frequencies below 100 MHz. You can also press the Right key to LABEL: This menu item will be used to add a label/name for each program. O Press the Left/Right key to select the label digit; press the Up/Down key to insert alphanumeric characters. Press the MENU key to exit without storing. MUTE: This item enables/disables picture and sound for the particular channel. O NONE: normal picture and sound enabled o VIDEO: picture is blanked for this channel (e. Radio channel) o AUDIO: sound is muted for this channel (e. Press the Left/Right key to toggle the protection between "YES" and "NO". PICTURE/SOUND: In this sub-menu, the PICTURE and SOUND settings of the TV can be set. â· SECURITY: In this sub-menu, the SECURITY settings of the TV can be configured. â· CONTROL: In this sub-menu, the CONTROL settings of the TV can be configured. â· VIDEO ADJUSTMENT: o HORIZONTAL: Adjust the horizontal placement of the picture o VERTICAL: Adjust the vertial placement of the picture o PHASE: Eliminates the horizontal interfering lines. In this sub menu the behavior of the TV after switching on and the behavior of the ON SCREEN DISPLAY can be selected. Pree Up key to insert alphabets, and Down key to insert digits. Use the Right/Left key to select PICTURE/SOUND the desired format. CONTRAST 50 o FORCED ON: TV will be automatically switched to ON mode whenever the mains power is turned ON or resumed SHARPNESS 50 ACTIVE interruption. YES after a power CONTROL Note that the remote control STANDBY key will no longer function when TV is set in this TREBLE 50 mode. TV can only be switched OFF by means of the main switch or a set-up remote control or by ESP function BASS 50 ON (Energy AVL Saving Programmability controls the maximum continuous viewing time allowed). O LAST STATUS: TV will be automatically switched to the last status (either STANDBY or ON) whenever the mains power is turned ON or resumed after a power interruption. Power is turned ON or resumed after a power interruption. SWITCH ON/OSD o ON: Similar function as "FORCED ON" but the remote control STANDBY key function is enabled when TV is set to this mode. [. . . ] TV Resolutions may be expressed as number of pixels in an image; or more commonly, As Total Number of (horizontally scanned) Lines used to create the image. Standard Digital TV Resolutions: SDTV: 576i - The picture is 720x576 pixels, 576p - The picture is 720x576 pixels. HDTV: 720p - The picture is 1280x720 pixels, 1080i - The picture is 1920x1080 pixels, SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound output. Care And Cleaning WARNING concerning stationary images on the TV Screen: Do not leave fixed images on the screen for extended periods of time. [. . . ]