User manual PHILIPS 32HFL3233D

[. . . ] Register your product and get support at This information is correct at the time of print. Switch your TV on Switch your TV to standby Switch your TV off Switch channels Watch connected devices Adjust TV volume Use teletext Back connections Side connections Connect a computer Use a Conditional Access Module Use Philips EasyLink Use a Kensington lock Use more of your TV Access TV menus Add device to the home menu Rename devices from the home menu Remove devices from the home menu Change picture and sound settings Use the universal access menu Use advanced teletext features Use the Electronic Programme Guide Display the TV clock Use timers Lock unsuitable content Change language Play photos, music and videos on USB storage devices Listen to digital radio channels Update the TV software Change TV preferences Start a TV demo Reset the TV to factory settings Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. [. . . ] You can update the TV software in one of the following ways: A: with a USB storage device, B: when prompted through digital broadcasts, or C: after being prompted through digital broadcasts. If the current software version is smaller than the latest software directory of your USB device. To update with a USB storage device, you need: · If a message prompts you to update the software, follow the on-screen instructions to update the TV software. If the message is not displayed, continue with the following steps: Press . Follow the on-screen instructions to complete the update. If you receive digital broadcasts (DVB-T), your TV can automatically receive software updates. When your TV receives a software update, it will prompt you to update the TV software. Use the preferences menu to customise your TV settings. Select one of the following, then press OK. [Location]: Optimise TV settings for your location - home or shop. [Auto switch off]: To conserve energy, set the TV to switch to standby automatically after a period of inactivity. This TV is also designed with other no user interaction (such as pressing a remote control button or a control on the front panel) for four hours, the TV will automatically switch to standby. [Audio out delay]: Automatically sync the image on your TV to the audio from a connected home theatre. [TV position]: Apply the best settings for your TV based on how it is mounted. If a message appears to prompt you to update your software, follow the instructions to start the update. ⻠The TV restarts after the software update is complete. If you do not want to update the software, select [Guest menu] > [Software settings] > [Clear announcement], then press OK. If you skip the update, you can update it manually later You can check if there are updates available through digital broadcasts. B: Update when prompted through digital broadcasts You can use demonstrations to better understand the features of your TV. Some demos are not available on certain models. You can restore the default picture and sound settings of your TV. If you are prompted to enter a code, enter the child-lock code (see `Set or change code' on page 22). [. . . ] Wait until the TV cools down before reconnecting the power cable. if the blinking reoccurs , contact Philips Consumer Care. You forgot the code to unlock the TV lock feature · When turning the TV on/off/to standby, you hear a creaking sound from the TV chassis: · no action is required. The creaking sound is normal expansion and contraction of the TV as it cools down and warms up. [. . . ]