User manual PHILIPS 32HFL3330

[. . . ] Register your product and get support at Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. We'll do everything in our power to keep you happy with your purchase for many years to come. This "bolt of lightning" indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. [. . . ] Carefully place the TV face down on a flat, stable surface that is covered by soft cloth. The cloth should be thick enough to protect your screen. Step 1 Purchase a VESA-compatible wall bracket Firmly pull the stand from the bottom of the TV. Place both the stand and bolts in a secure location for future reinstallation. Open the battery cover on the back of the remote control. Make sure the + and - ends of the batteries line up correctly. Step 3 Connect cables Connect the antenna cable, AC power cord and all other devices to the back of the TV as described in the following sections and in Section 7 Connect devices. Step 4 Secure the VESA-compatible wall bracket to the TV B Warning Only use the specified bolts (M6 x 10mm) to secure the VESA-compatible wall bracket to your TV. The specified bolts are designed to match the weight of your TV. D Note Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA-compatible wall bracket documentation for instructions. Use an adaptor if the antenna cable does not fit. Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tightly secured at both ends. Connect the AC power cord B Warning Verify that your voltage corresponds with the voltage printed at the back of the TV. Do not insert the AC power cord if the voltage is different. A cable receiver box can be connected to the TV through the following connections: · Locate the power connector at the back of the TV. The location of the power connector varies according to TV model. Insert the AC power cord fully into the TV power connector. Connect the AC power cord plug to the power outlet. Cable box Connect a cable receiver Receiver through Box component video input or HDMI The TV normally takes 10-15 seconds to start up and the following screen appears the first time you turn on the TV. This section helps you perform basic TV operations. Press a number (1 to 9) or press CH +/- on your remote control. [. . . ] Standard Digital TV Resolutions: SDTV: 576i - The picture is 704x576 pixels, 576p - The picture is 720x576 pixels. HDTV: 720p - The picture is 1280x720 pixels, 1080i - The picture is 1920x1080 pixels. Ensure the AC power cord is connected tightly to the TV power connector and to the power socket outlet. Remove the AC power cord from the power socket outlet, wait 60 seconds and reconnect the AC power cord. [. . . ]