User manual PHILIPS 32PF9541

[. . . ] About this User Manual This manual contains all information you will need to initially install and operate your new TV. Also read the help texts which are being displayed at the bottom of the screen. If this instruction manual does not give an answer or if `Troubleshooting' does not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied Worldwide guarantee booklet. [. . . ] Select the channel number under which you have stored the programme that comes from your decoder or descrambler. Select the input used to connect your decoder: None, EXT1 or EXT2. < Select None if you do not want the selected channel number being activated as a decoder channel number. TV menu Installation Decoder Channel Languages Status Country Channels Preferences Connections Decoder Factory settings Software upgrade Info 29 EN Reset the Factory settings This allows you to reset most of the predefined factory states. Factory settings TV menu Installation Language Reset Country Channels Preferences Connections Decoder Factory settings Software upgrade Info 1. Press the OK key to erase settings and reset them to their default values. How to upgrade the TV software This allows you to upgrade your TV software using a USB device. TV menu Installation Software upgrade Current softw. info Language Local upgrades Country Announcement Channels Preferences Connections Decoder Factory settings Software upgrade Info USB device upgrade It is possible to initiate an upgrade procedure from a USB device (before you start up the TV). The memory device must be filled with the appropriate upgrade image (and structure) which can be found on the www. How to upload a new software version on your memory device, see Annex 2, Philips TV software upgrade with portable memory, p. 50. Automatic software announcement (if present) When you switch on your TV a message may appear that a new software upgrade is available. Press the red colour key on your remote control if you want to be reminded later on. Press the green colour key on your remote control to confirm you have read the message. > Once you have confirmed, the message will not pop up again. If however, you want to see the last broadcasted announcement again, select Announcement in the Software upgrade menu. Note: as long as the software upgrade has not been executed, the message will be available. < < 30 Create your favourite list This allows you to select up to four favourite channels lists with your preferred TV channels and radio stations. For example, each member of your family can create his/her own favourite list. In addition to the favourite channel lists you may also select a list with only digital TV channels or a list with only the radio channels or a list with only the analogue channels. Note: when this key is pressed the first time after you have finished the installation, it will bring up the full channel list. In other situations it will bring up the last selected channel list. EN To select a channel from the displayed favourite list All channels EXT1 EXT2 HDMI 1 Analogue channel 1 A 2 Digital channel 1 3 Digital channel 2 4 Radio channel 1 b2 5 Data channel 1 Change list Tune to a channel by pressing OK. > The last selected channel list appears. Use the cursor up/down to select a channel. Press the OK key to display the selected channel. To select another favourite channel list 1. > The last selected channel list appears. Press the red colour key to bring up the list of possible favourite channel lists. Use the cursor up/down to select a list. [. . . ] 17 standby key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 store channels . . . . . . . . . . . . . . . . . . . . . . . . . . 26 subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 surround mode . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]