User manual PHILIPS 32PF9966 4

[. . . ] If this instruction manual does not give an answer or if `Tips' do not solve your TV problem, you can call your Local Philips Customer or Service Centre. See the supplied World-wide guarantee booklet. Please, have the Model and Product number which you can find at the back of your television set or on the packaging, ready, before calling the Philips helpline. Model: 32PF9966/93 42PF9966/93 50PF9966/93 Product No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Select this setting if you want the Ambilight to fit best with normal living room lighting. · Cool white:The Colour is matched to that of normal daylight (6500K). Select this setting if you prefer more cool lighting. Note: the 6500 K is the SMPTE recommended setting for ambient backlighting of displays. · Blue:The blue Colour is preferred by most consumers to create a cool, modern and /or mystical atmosphere. Select this setting according to your personal taste or mood. · Off: will switch off the ambient lights and downlight all other menu items. · On: the ambient lights will be on. Refine the light settings in the menus below. ` Select Brightness to adjust the light output of the ambient lights. ( Select Mode and press the cursor right to select Colour, Ambience, Relaxed, Movie or Action. · Colour: this will show constant light according to the settings in the Ambilight colour menu. · The options Ambience, Relaxed, Movie and Action will dynamically match brightness and colour to the screen content. The mode selection made will effect the speed and/or saturation and/or intensity which determines the viewing impression. in Relaxed mode, the rate of brightness and colour change is smoothly and soft which gives you a more immersive yet relaxed viewing. Ambience is the rate of brightness and colour change as predefined in the factory. Movie will influence the perception of a movie whereas Action mode will influence the dynamic impression. Notes: - The rate of change is limited, as not to cause uncomfortable sensations. - According to the selection made, some Ambilight menu items will be downlighted and can not be selected. § In case Colour has been selected in the Mode menu: · Select Colour in the Ambilight menu and press the cursor right. · Select Personal, Warm white, Cool white or Blue. · Select Palette to select the general colour of the light. · Select Saturation to adjust the colourfullness of the light. [. . . ] · Are brightness, sharpness and contrast out of adjustment?Select Factory settings in the Setup, General menu, p. · Are the supplied cables connected properly ?(The aerial cable to the TV, the other aerial to your recorder, the VGA cables to the display, the power cables. ) · Has the child lock been switched off ? [. . . ]